含孔型缺口的纤维金属层板剩余强度

doi:10.12068/j.issn.1005-3026.2017.03.015

东北大学学报:自然科学版 ›› 2017, Vol. 38 ›› Issue (3): 375-378.DOI: 10.12068/j.issn.1005-3026.2017.03.015

含孔型缺口的纤维金属层板剩余强度

佟安时¹，谢里阳¹，刘建中²，张啸尘¹

(1. 东北大学机械工程与自动化学院，辽宁沈阳110819； 2. 北京航空材料研究院，北京100095)

收稿日期:2015-10-13 修回日期:2015-10-13 出版日期:2017-03-15 发布日期:2017-03-24
通讯作者: 佟安时
作者简介:佟安时(1985-)，男，辽宁沈阳人，东北大学博士研究生；谢里阳(1962-)，男，安徽岳西人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金重点资助项目(51335003).

Residual Strength of Notched Fiber Metal Laminates

TONG An-shi¹， XIE Li-yang¹， LIU Jian-zhong²， ZHANG Xiao-chen¹

1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China； 2. Avic Beijing Institute of Aeronautical Materials， Beijing 100095， China.

Received:2015-10-13 Revised:2015-10-13 Online:2017-03-15 Published:2017-03-24
Contact: XIE Li-yang
About author:-
Supported by:
-

摘要/Abstract

摘要： 纤维金属层板(fiber metal laminates，FMLs)作为混合层板家族中一员，由铝合金层和预浸料层交替铺设而成.相比于铝合金板，含缺口的纤维金属层板强度下降更为明显.为研究含孔型缺口的纤维金属层板的剩余强度，测试了光滑试样的静力拉伸性能和缺口试样的剩余强度.分析了铺层结构对剩余强度的影响，引入应力失效模型预测了纤维金属层板含孔型缺口的剩余强度，讨论了含缺口纤维金属层板的失效模式、损伤萌生和扩展过程.结果显示:带孔GLARE3层板的强度下降约为40%，铺层增加后缺口敏感性下降，特征长度增加，约在90%的剩余强度时缺口处有损伤发生.

关键词: 纤维金属层板, 剩余强度, 应力失效模型, 损伤机制, 玻璃纤维

Abstract: Fiber metal laminates (FMLs) are a family of hybrid materials consisting of alternating thin coatings of aluminum alloy and fiber-reinforced epoxy layers. In contrast to aluminum alloys， the presence of notches in FMLs causes significant strength reduction. To evaluate the residual strength of fiber metal laminates with circular open hole， mechanical testing was performed to determine the un-notched tensile properties and notched strength of FMLs. The influence of ply structure on residual strength of FMLs was investigated. The stress failure model was introduced to predict the residual strength of FMLs with an open hole. Failure modes， damage initiation and progression of notched FMLs were also characterized and discussed. The results show that the presence of a hole in GLARE3 laminates gives a strength reduction about 40%. It can be seen that the characteristic length increase and notch sensitivity tends to decrease with the increase of ply number. The damage initiated at the hole edge when the residual strength is 90%.

Key words: fiber metal laminates, residual strength, stress failure model, damage mechanism, glass fiber

中图分类号:

TB333

佟安时，谢里阳，刘建中，张啸尘. 含孔型缺口的纤维金属层板剩余强度[J]. 东北大学学报:自然科学版, 2017, 38(3): 375-378.

TONG An-shi， XIE Li-yang， LIU Jian-zhong， ZHANG Xiao-chen. Residual Strength of Notched Fiber Metal Laminates[J]. Journal of Northeastern University Natural Science, 2017, 38(3): 375-378.

参考文献

[1]Sinke J.Manufacturing of GLARE parts and structures［J］.Applied Composite Materials，2003，10(4/5):293-305.
[2]Vlot A.Impact loading on fibre metal laminates［J］.International Journal of Impact Engineering，1996，18(3):291-307.
[3]Vermeeren C A J R，Beumler T H，De Kanter J L C G，et al.GLARE design aspects and philosophies［J］.Applied Composite Materials，2003，10(4/5):257-276.
[4]Vogelesang L B，Vlot A.Development of fibre metal laminates for advanced aerospace structures［J］.Journal of Materials Processing Technology，2000，103(1):1-5.
[5]黄啸，刘建中.新型纤维金属混合层板结构的疲劳裂纹扩展与分层行为［J］.航空材料学报，2012，32(5):97-102.(Huang Xiao，Liu Jian-zhong.Fatigue crack propagation and delamination behavior of advanced fiber metal hybrid laminate［J］.Journal of Aeronautical Materials，2012，32(5):97-102.)
[6]Gunnink J W.Damage tolerance and supportability aspect of ARALL laminate aircraft structures［J］.Composite Structures ，1988，10(1):83-104.
[7]Kadiyala S P，Gurdal Z，Herakovich C T.An experimental and numerical study of notch sensitivity of ARALL laminates with holes［C］//Proceedings of the 4th Japan-US Conference on Composite Materials.Washington D C，1988:79-88.
[8]Hidde J S，Herakovich C T.Notch sensitivity of ARALL laminates［C］//Proceedings of the 7th International Conference on Composite Materials.Guangzhou，1989:35-40.
[9]Akbar A K，Glyn L，Lin Y，et al.On the fracture mechanical behaviour of fibre reinforced metal laminates (FRMLs)［J］.Computer Methods in Applied Mechanics and Engineering，2000，185(2/3/4):173-190.
[10]Wu G C，Tan Y，Yang J M.Evaluation of residual strength of notched fiber metal laminates［J］.Materials Science Engineering，2007，457(1/2):338-349.
[11]Kawai M，Arai Y.Off-axis notched strength of fiber-metal laminates and a formula for predicting anisotropic size effect［J］.Composites:Part A，2009，40(12):1900-1910.

含孔型缺口的纤维金属层板剩余强度

Residual Strength of Notched Fiber Metal Laminates

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	佟安时，谢里阳，白鑫，孟维迎. 纤维金属层板的拉伸性能研究[J]. 东北大学学报:自然科学版, 2017, 38(12): 1736-1740.
[2]	佟安时，谢里阳，刘建中，白恩军. 静力拉伸载荷下纤维金属层板的变形行为[J]. 东北大学学报:自然科学版, 2017, 38(1): 91-94.
[3]	周继烈，冯楚凡. 玻璃纤维短切刀具结构参数和材料的优化研究[J]. 东北大学学报（自然科学版）, 2013, 34(12): 1768-1772.
[4]	吕文阁;谢里阳;徐灏. 复杂载荷下的疲劳寿命估算[J]. 东北大学学报:自然科学版, 1996, 17(6): 4--.