东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2017, Vol. 38 ›› Issue (5): 730-735.DOI: 10.12068/j.issn.1005-3026.2017.05.025

• 资源与土木工程 • 上一篇    下一篇

一种三维结构建模中的地层厚度控制算法

曹凯， 潘懋， 孙鹏   

  1. (北京大学 地球与空间科学学院， 北京100871)
  • 收稿日期:2016-09-18 修回日期:2016-09-18 出版日期:2017-05-15 发布日期:2017-05-11
  • 通讯作者: 曹凯
  • 作者简介:曹凯(1990-)，男，江西上伐人，北京大学博士研究生； 潘懋(1954-)，男，内蒙古赤峰人，北京大学教授，博士生导师.
  • 基金资助:

    国家重大科技专项(2016ZX05010-001).

A Stratigraphic Thickness Control Algorithm in 3D Structural Modeling

CAO Kai， PAN Mao， SUN Peng   

  1. School of Earth and Space Sciences， Peking University， Beijing 100871， China.
  • Received:2016-09-18 Revised:2016-09-18 Online:2017-05-15 Published:2017-05-11
  • Contact: CAO Kai
  • About author:-
  • Supported by:

    -

RichHTML

1

PDF (PC)

797

摘要：

在三维结构建模中，构建地层面时常常因不符合真实地质情况的插值点出现而产生不合理的层面厚度.针对这一问题，提出一种厚度控制算法.首先对不规则三角网建立空间索引和OBB碰撞模型，在此基础上进行相交测试找出不合理厚度位置，然后采用拓扑学中几何图形剖分的思想，在0维和1维上进行厚度调整.该方法已在石油、矿山领域成功运用，应用结果表明本文算法求解速度快、运行稳定、结果可靠，能自动有效地控制层面厚度，避免了大量人工交互的厚度调整操作.

关键词: 地层厚度控制, 三维地质建模, 三维结构建模, 不规则三角网, 碰撞检测, 空间索引

Abstract:

In 3D stuctural modeling， during construction of the stratigraphic surface， unreasonable stratigraphic thickness often arises by the interpolation point that is not consistent with the actual geological conditions. To address this problem， a new method for the thickness control is proposed. Firstly， a model of spatial index and OBB collision for triangulated irregular network is established. Secondly， according to the model， the position of the layer with unreasonable thickness is found out by intersection test. Thirdly， with the thought of geometry subdivision in topology， the thickness control is performed on zero and one dimensions. This method has been successfully applied in petroleum and mine field. The results show that the algorithm is fast， stable and reliable. It can be used to control the thickness of the layer automatically， avoiding massive manual interaction operations of thickness adjustment.

Key words: stratigraphic thickness control, 3D geological modeling, 3D structural modeling, triangulated irregular net-work (TIN), collision test, spatial index

中图分类号: