东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2011, Vol. 32 ›› Issue (7): 1008-1011.DOI: -

• 论著 • 上一篇    下一篇

基于螺旋面钻头振动钻削实验研究及机理分析

高兴军;邹平;向志杨;   

  1. 东北大学机械工程与自动化学院;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    辽宁省自然科学基金资助项目(20102067)

Experiment study and mechanism analysis of the vibration drilling based on helical drill

Gao, Xing-Jun (1); Zou, Ping (1); Xiang, Zhi-Yang (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Gao, X.-J.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

931

摘要： 通过振动钻削实验装置,采用普通麻花钻和螺旋面钻头在不同的振动钻削参数下对高温合金和碳钢进行振动钻削实验,分析基于螺旋面钻头普通钻削和轴向振动钻削条件下不同的断屑效果.并针对钻削中轴向钻削力和扭矩进行实验研究和理论分析,研究普通麻花钻和刃磨螺旋面麻花钻对加工过程的不同影响.实验结果表明:与普通钻削所得的切屑比较,振动钻削有利于断屑,切屑体积小,排屑顺畅;复杂螺旋面振动钻削中轴向力与扭矩比普通麻花钻小,其轴向力的变化过程也比普通麻花钻平稳.

关键词: 振动钻削, 刃磨, 断屑机理, 螺旋面钻头, 麻花钻

Abstract: With the aid of the vibration drilling table, experiments were carried out on high temperature alloy and carbon steel under different parameters by using normal twist drill and helical drill, respectively. The differences of breaking chip effect between the vibration cutting and the normal drilling of helical drill were studied. The axial drilling force and the torque of vibration drilling were experimentally and theoretically studied. Effects of the use of normal twist drill and helical drill on the machining process were theoretically discussed. The results showed that, compared to ordinary drilling, vibration drilling is favorable for chip breaking, small chip and easy chip removal. The vibration drilling force and torque by using the complex helical drill are much smaller than that by normal twist drill and the change of the drilling force is relatively steady.

中图分类号: