前掠角对车用轴流式冷却风扇性能的影响

doi:10.12068/j.issn.1005-3026.2019.06.019

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (6): 862-868.DOI: 10.12068/j.issn.1005-3026.2019.06.019

前掠角对车用轴流式冷却风扇性能的影响

谢翌¹，许孟陶¹，李夔宁²，郑云¹

(1. 重庆大学汽车工程学院，重庆400044; 2. 重庆大学能源与动力工程学院，重庆400044)

收稿日期:2018-04-24 修回日期:2018-04-24 出版日期:2019-06-15 发布日期:2019-06-14
通讯作者: 谢翌
作者简介:谢翌(1983-)，男，重庆人，重庆大学副教授；李夔宁(1970-)，男，重庆人，重庆大学教授，博士生导师.
基金资助:
国家自然科学基金青年基金资助项目(51405045)；重庆市重点产业共性关键技术创新专项(重点研发项目)(cstc2017zday-zdyf0139)；重庆市科技计划项目(cstc2016jcyjA0494)；中央高校基本科研业务费专项资金资助项目(CDJZR14110002).

Effect of Forward-Swept Angles on Performance of Axial Cooling Fans for Vehicles

XIE Yi¹， XU Meng-tao¹， LI Kui-ning²， ZHENG Yun¹

1. School of Automotive Engineering， Chongqing University， Chongqing 400044， China; 2. School of Power Engineering， Chongqing University， Chongqing 400044， China.

Received:2018-04-24 Revised:2018-04-24 Online:2019-06-15 Published:2019-06-14
Contact: XIE Yi
About author:-
Supported by:
-

摘要/Abstract

摘要： 建立了某车用冷却风扇不同前掠角参数化模型，并基于计算流体力学的方法对其流动进行了仿真，研究了不同风扇转速下，前掠角对冷却风扇流动、风量以及阻力矩的影响.在压力分布方面，研究结果表明:随着冷却风扇前掠角的增加，相同的转速下，风扇叶栅入口处，空气的平均压力不断升高，叶栅流道内，相邻叶片间升力面和吸力面间的压力梯度逐渐减小，同一叶片升力面同吸力面间的压差逐渐降低.在速度分布方面，随着前掠角的增加，相同的转速下，风扇叶栅入口处，空气的流速逐渐减小，叶栅流道内，空气速度的增加逐渐减小.在风扇性能方面，随着前掠角的增加，相同的转速下，风扇风量逐渐减小，风扇阻力矩逐渐降低.

关键词: 冷却风扇, 前掠角, 风扇转速, 风扇风量, 风扇阻力矩

Abstract: The parameter models of forward-swept angles of cooling fans for vehicles were established. Their flow fields were simulated by using computational fluid mechanics method， and the effect of forward-swept angles on the flow field， volume flow rate and resistance torque of cooling fans was researched. In terms of pressure distribution， the results showed that at the same ration speed， the average air pressure at the inlet of cascade increases with the forward-swept angle and both the gradient and the pressure difference between blade lift-surface and blade suction surface falls with the forward-swept angle. In terms of velocity distribution， at the same rotation speed of cooling fans， the air velocity at the inlet of cascade decreases and the rise in the air velocity goes down with the forward-swept angle. In terms of the performance of cooling fans， at the same rotation speed， both fan volume flow rate and fan resistance torque reduce with the forward-swept angle.

Key words: cooling fan, forward-swept angle, fan rotation speed, fan volume flow rate, fan resistance torque

中图分类号:

TK432

谢翌，许孟陶，李夔宁，郑云. 前掠角对车用轴流式冷却风扇性能的影响[J]. 东北大学学报:自然科学版, 2019, 40(6): 862-868.

XIE Yi， XU Meng-tao， LI Kui-ning， ZHENG Yun. Effect of Forward-Swept Angles on Performance of Axial Cooling Fans for Vehicles[J]. Journal of Northeastern University Natural Science, 2019, 40(6): 862-868.

参考文献

[1]Hurault J，Kouidri S，Bakir F.Experimental investigations on the wall pressure measurement on the blade of axial flow fans［J］.Experimental Thermal and Fluid Science，2012，40:29-37.
[2]Tao X，Wagner J R.An engine thermal management system design for military ground vehicle-simultaneous fan，pump and valve control［J］.SAE International Journal of Passenger Cars Electronic and Electrical Systems，2016，9(1):243-254.
[3]Martini H，Gullberg P，Lofdahl L.Comparative studies between CFD and wind tunnel measurements of cooling performance and external aerodynamics for a heavy truch［J］.SAE International Journal of Commercial Vehicles，2014，7(2):640-652.
[4]Thorat A A，Kulkarni M，Berg A，et al.CFD investigation of airflow through fan and cooler system of an off road vehicle［C］// 8th SAEINDIA International Mobility Conference & Exposition and Commercial Vehicle Engineering Congress.Chennai，2013:1-9.
[5]Baniasadi E，Aydin M，Dincer I，et al.Computational aerodynamic study of automotive cooling fan in blocked conditions［J］.Engineering Applications of Computational Fluid Mechanics，2013，7(1):66-73.
[6]唐永伟.汽车发动机冷却风扇气动性能和声学性能研究［D］.长春:吉林大学，2007.(Tang Yong-wei.Study on aerodynamic performance and aero-acoustic performance of engine cooling fan［D］.Changchun:Jilin University，2007.)
[7]王天宇，王霄，刘会霞，等.发动机冷却风扇性能的优化设计研究［J］.机电工程，2015，32(6):744-749.(Wang Tian-yu，Wang Xiao，Liu Hui-xia，et al.Performance optimization of engine cooling fan［J］.Journal of Mechanical & Electrical Engineering，2015，32(6):744-749.)
[8]陈彬彬.装载机冷却风扇变环量设计与流场不均匀性研究［D］.长春:吉林大学，2015.(Chen Bin-bin.Research on variable circulation design and aerodynamic non-uniform characteristics of cooling fan for loader［D］.Changchun:Jilin University，2015.)
[9]唐钊.发动机冷却风扇叶片参数的研究和优化［D］.广州:华南理工大学，2012.(Tang Zhao.A research on parameters of engine cooling fan blade and optimization［D］.Guangzhou:South China University of Technology，2012.)
[10]Pogorelov A，Meinke M，Schroder W.Effects of tip-gap width on the flow field in an axial fan［J］.International Journal of Heat and Fluid Flow， 2016，61:466-481.
[11]Menter F R，Langtry R B，Likki S R，et al.A correlation-based transition model using local variables—Part I:model formulation［J］.Journal of Turbomachinery，2006，128(3):413-422.

前掠角对车用轴流式冷却风扇性能的影响

Effect of Forward-Swept Angles on Performance of Axial Cooling Fans for Vehicles

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价