东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (12): 1747-1750.DOI: -

• 论著 • 上一篇    下一篇

半固态ZL201合金触变强度与变形参数的相关性

王平;高超;卢温泉;崔建忠;   

  1. 东北大学材料电磁过程研究教育部重点实验室;沈阳师范大学物理科学与技术学院;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-12-15 发布日期:2013-06-22
  • 通讯作者: Lu, W.-Q.
  • 作者简介:-
  • 基金资助:
    国家重点基础研究发展计划项目(2005CB623707);;

Correlation between thixoforming stress and deformation parameters of semi-solid alloy ZL201

Wang, Ping (1); Gao, Chao (2); Lu, Wen-Quan (1); Cui, Jian-Zhong (1)   

  1. (1) Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110004, China; (2) College of Physics Science and Technology, Shenyang Normal University, Shenyang 110034, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-12-15 Published:2013-06-22
  • Contact: Lu, W.-Q.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

559

摘要： 采用Gleeble1500热模拟机,研究了半固态ZL201铝合金的压缩变形过程以及不同应变速率、变形量及变形温度对触变强度的影响.研究结果表明:当应变速率相同时,变形温度越高,ZL201合金半固态试样的触变强度越低.当变形温度相同时,在较低应变速率下(.ε<5s-1),随着应变速率的增大,ZL201合金半固态试样的触变强度增大;在较高应变速率下(.ε>5s-1),随着应变速率的增大,触变强度又有减小的趋势.结果可为半固态成形工艺参数制定提供基础数据.

关键词: 半固态, ZL201铝合金, 压缩变形, 应变速率, 触变强度

Abstract: The compression deformation process of the semi-solid alloy ZL201 and the influence of its strain rate and deformation extent/temperature on the thixoforming stress were investigated on the Gleeble-1500 thermo-simulator. It was revealed that the higher the deformation temperature, the lower the thixoforming stress of specimens at the same strain rate. On the other hand, if the deformation temperature remains unchanged and the strain rate Ε˙<5 s-1, the higher the strain rates, the higher the thixoforming stress. And if Ε˙>5 s-1, the thixoforming stress tends to decrease with increasing strain rate. The results can provide the basic data for the optimization of process parameters of semi-solid metals.

中图分类号: