东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (10): 1458-1461.DOI: -

• 论著 • 上一篇    下一篇

高速摄像机图像处理法确定风口回旋区边界

孙野;罗志国;邹宗树;刘洪华;   

  1. 东北大学材料与冶金学院;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-10-15 发布日期:2013-06-22
  • 通讯作者: Sun, Y.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50774019)

Determining raceway boundary by image processing via high-speed video camera

Sun, Ye (1); Luo, Zhi-Guo (1); Zou, Zong-Shu (1); Liu, Hong-Hua (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-10-15 Published:2013-06-22
  • Contact: Sun, Y.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

789

摘要： 通过建立COREX熔化气化炉的对称半体冷态模型,利用高速摄影的手段跟踪示踪颗粒,得到观察面板处风口回旋区域的颗粒运动信息.通过对大量颗粒运动信息的处理得到风口回旋区的颗粒速度标量场,将其与目测结果对比,确定0.15m/s以内的颗粒速度标量场为风口回旋区域.本研究结果可为COREX熔化气化炉及高炉等的理论研究或数学模拟提供准确的边界条件.

关键词: 高速摄像, 熔化气化炉, 回旋区, 物理模拟, 颗粒速度云图

Abstract: Developing a cold-state model of COREX melter-gasifier in its symmetric half and using a high-speed video camera to track tracer particles, the information on the moving particles in and around the raceway near observing panel can be obtained. Then, the scalar field of particle velocity in raceway can be obtained by processing a great deal of the data of moving particles. Compared with the observation results, the scalar field where the particle velocity is within 0.15 m/s is defined as the raceway. In such a way the boundary conditions can be provided precisely for the theoretical study and mathematical modeling of gas/solid flow and chemical reaction in and around the raceway of COREX melter-gasifier or blast furnace.

中图分类号: