东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (1): 98-100+104.DOI: -

• 论著 • 上一篇    下一篇

铝酸镧单晶基底上沉积BaPbO_3导电膜的研究

高锋;李凤华;王娜;樊占国;   

  1. 东北大学材料与冶金学院;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-01-15 发布日期:2013-06-22
  • 通讯作者: Gao, F.
  • 作者简介:-
  • 基金资助:
    国家青年科学基金资助项目(50702012)

On the BaPbO3 conductive film deposited on monocrystalline LaAlO3 substrate

Gao, Feng (1); Li, Feng-Hua (1); Wang, Na (1); Fan, Zhan-Guo (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-01-15 Published:2013-06-22
  • Contact: Gao, F.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

742

摘要： 为了使BaPbO3薄膜作为YBCO涂层导体的导电隔离层,必须制备出具有一定取向且表面平整光滑的薄膜.实验采用乙酸钡和乙酸铅为溶质,以丙酸为溶剂,制得了稳定均匀的涂层前驱液.前驱液在单晶LaAlO3(100)基底上旋转涂覆形成的前驱膜在氧气的环境下于650℃烧结30 min制备出薄膜样品.经XRD分析,薄膜物相组成为单相的BaPbO3,且具有少许(100)取向;通过SEM观察,其表面均匀致密,厚度约为650nm;用四引线法测得薄膜室温电阻率为1×10-3Ω.cm.

关键词: BaPbO3, 导电膜, 超导, 金属有机物沉积, 涂层导体

Abstract: The flat and smooth BaPbO3 thin film with a certain crystal orientation was prepared as a conductively isolated layer for YBCO coated conductors. In the experiment, a stably homogeneous precursor solution was obtained taking the barium acetate and lead acetate as solutes with propionic acid as solvent. Then, the precursor film was deposited on the monocrystalline LaAlO3 (100) substrate by spin-coating the solution, and a BaPbO3 thin film was prepared by sintering the precursor film at 650 °C for 30 min in oxygen atmosphere. The XRD patterns showed that the film is of single-phase BaPbO3 with a slight (100) orientation, and the SEM images revealed that the film is about 650 nm thick with a compact and homogeneous surface. The thin film resistance was measured by four-probe method at room temperature and the resistivity is about 1×10-3 Ω·cm.

中图分类号: