东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (5): 681-684.DOI: -

• 论著 • 上一篇    下一篇

强磁场下Fe-C合金中碳的质量分数对先共析铁素体形貌的影响

王守晶;宋建宇;赵骧;左良;   

  1. 东北大学材料各向异性和织构教育部重点实验室;东北大学材料各向异性和织构教育部重点实验室;东北大学材料各向异性和织构教育部重点实验室;东北大学材料各向异性和织构教育部重点实验室 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-05-15 发布日期:2013-06-22
  • 通讯作者: Wang, S.-J.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金杰出青年基金资助项目(50325102);;

Effect of carbon content on morphology of proeutectoid ferrite grains in Fe-C alloy in high magnetic field

Wang, Shou-Jing (1); Song, Jian-Yu (1); Zhao, Xiang (1); Zuo, Liang (1)   

  1. (1) Key Laboratory for Anisotropy and Texture of Materials, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-05-15 Published:2013-06-22
  • Contact: Wang, S.-J.
  • About author:-
  • Supported by:
    -

摘要: 选用高纯Fe-0.12C,Fe-0.36C,Fe-0.52C及Fe-0.76C合金为实验材料,研究了强磁场退火条件下碳质量分数对Fe-C合金先共析铁素体晶粒形状和尺寸的影响规律.结果表明:随着碳的质量分数增加,先共析铁素体晶粒不但逐渐减小,而且沿强磁场方向伸长并呈链式排列的趋势不断减弱.产生上述现象不仅与Fe-C合金的碳质量分数相关,而且与先共析铁素体晶粒的形成过程和演变机理密不可分.并由此提出一种碳质量分数较低的Fe-C合金在先共析铁素体转变初期或碳含量接近共析成分的Fe-C合金中先共析铁素体晶核距离较远的情况下适用的磁偶极子模型.

关键词: 强磁场, 铁素体转变, 磁偶极子, Fe-C合金, 晶粒形貌

Abstract: The effect of carbon content on the morphology of proeutectoid ferrite grains in Fe-C alloys annealed in high magnetic field was investigated, especially in high-purity Fe-0.12C, Fe-0.36C, Fe-0.52C and Fe-0.76C alloys. The results showed that the grain size of the proeutectoid ferrite gradually decreases with increasing carbon content and the trend to elongating the grains in the magnetic field direction to form chain-like arrangement becomes weaker. This phenomenon is not only attributed to the different carbon contents of the Fe-C alloys, but also closely related to the formation process and evolution mechanism of the proeutectoid ferrite grains. Consequently, a magnetic dipole model is proposed applicable to the early stage of proeutectoid ferrite transformation in low carbon Fe-C alloys or in case the distance between proeutectoid ferrite nucleus is relatively long in the Fe-C alloys in which the carbon content approaches the eutectoid composition.

中图分类号: