东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (5): 718-721+729.DOI: -

• 论著 • 上一篇    下一篇

基于MAS的网络化三维协同设计

屈力刚;王伟;巩亚东;王宛山;   

  1. 东北大学机械工程与自动化学院;沈阳航空工业学院机械与汽车学院;东北大学机械工程与自动化学院;东北大学机械工程与自动化学院 辽宁沈阳110004;辽宁沈阳110136;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-05-15 发布日期:2013-06-22
  • 通讯作者: Qu, L.-G.
  • 作者简介:-
  • 基金资助:
    辽宁省重大科技攻关项目(2003220025)

Research on 3D networked collaborative design based on multi-agent system

Qu, Li-Gang (1); Wang, Wei (2); Gong, Ya-Dong (1); Wang, Wan-Shan (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China; (2) School of Mechanical Engineering and Automobile, Shenyang Institute of Aeronautical Engineering, Shenyang 110136, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-05-15 Published:2013-06-22
  • Contact: Qu, L.-G.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

562

摘要： 针对网络化协同设计在先进制造技术领域中的地位,提出了基于MAS的三维协同设计功能和系统结构模型及其Agent的一般模型,研究了协同设计的项目管理、F-AHP算法的伙伴选择和DSM方法的任务分解与分配等关键技术;通过对协同通讯、交互工具和设计工具等系统实现技术的探讨,构建了基于MAS的三维协同设计系统的原型系统,并在实际产品设计过程中进行测试应用,验证了该系统支持面向项目管理的产品三维协同设计.

关键词: 协同设计, MAS, DSM, 关键技术, 系统实现, 原型系统

Abstract: An MAS-based functional and architectonic model of a collaborative 3D design system and a typically structural model of Agent were proposed according to the computer supported collaborative design (CSCD) which plays an important role in advanced manufacturing technology. The key technologies including project management, selection of collaborator in F-AHP algorithm and tasks' decomposition/assignment based on DSM method are all discussed, as well as the implementation of collaborative communication, interactive instrument and design tools. An archetypal system of collaborative 3D design is then built. The system has been experimentally implemented in an actual design process of a certain industrial product to verify its project-management-oriented function.

中图分类号: