东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2006, Vol. 27 ›› Issue (10): 1102-1105.DOI: -

• 论著 • 上一篇    下一篇

中厚板轧线的坯料出炉时间控制

矫志杰;胡贤磊;赵忠;刘相华;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-23 修回日期:2013-06-23 出版日期:2006-10-15 发布日期:2013-06-23
  • 通讯作者: Jiao, Z.-J.
  • 作者简介:-
  • 基金资助:
    国家经贸委基金资助项目(ZZ0113A040201).

Slab discharging time control for plate rolling line

Jiao, Zhi-Jie (1); Hu, Xian-Lei (1); Zhao, Zhong (1); Liu, Xiang-Hua (1)   

  1. (1) State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-23 Revised:2013-06-23 Online:2006-10-15 Published:2013-06-23
  • Contact: Jiao, Z.-J.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

809

摘要： 针对中厚板轧线,研究了在实行控制轧制工艺时,如何对坯料的出炉时间进行合理控制,以满足多坯交叉轧制过程轧制节奏控制的需要.介绍了典型单机架中厚板轧线的设备布置情况,并根据不同交叉轧制情况下的轧制节奏控制状态确定坯料之间的轧制间隔时间;根据具体轧线布局计算坯料的出炉运输时间,并确定坯料的出炉剩余时间.考虑其他非理想状况的影响因素,设置坯料出炉剩余时间极限值,实际控制中通过调整该值,保证坯料出炉时间控制的最佳效果.

关键词: 中厚板轧线, 控制轧制, 交叉轧制, 轧制节奏控制, 运输时间, 出炉时间控制

Abstract: Investigates how to control reasonably the slab discharging time for plate rolling line to meet the requirements for scheduling a multi-slab alternate rolling process. Describes the typical layout of a single-stand plate rolling line and according to the scheduled rolling rhythm for the process, the time interval between two rolling operations is given. The conveying time after slab discharging is calculated according to the layout of rolling line, with the remaining time after discharging also calculated. A limit value is set up for the remaining time to consider unexpected influencing factors, which can be readjusted in actual operation to optimize the control effect of slab discharge time.

中图分类号: