东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (10): 1428-1430+1435.DOI: -

• 论著 • 上一篇    下一篇

低迟滞PMN-PT叠层型驱动器件的制备

李勤男;祁阳;   

  1. 东北大学理学院;金日成综合大学材料科学系;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 出版日期:2012-10-15 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(51172040)

Fabrication of low hysteresis PMN-PT stack actuator

Ri, Kun-Nam (1); Qi, Yang (1)   

  1. (1) School of Sciences, Northeastern University, Shenyang 110819, China; (2) Faculty of Material Science, Kim IL Sung University, Pyongyang 999093, Korea, People's Democratic Rep
  • Received:2013-06-19 Revised:2013-06-19 Online:2012-10-15 Published:2013-04-04
  • Contact: Ri, K.-N.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

620

摘要： 研究了PMN-PT电致应变陶瓷材料的铌铁矿法制备及其电致应变性能,以及该陶瓷膜叠层型驱动器件的制备条件及性能.结果表明,0.94PMN-0.06PT陶瓷的应变迟滞最小;利用压延法可以提高叠层陶瓷膜的密度等特性;叠层型驱动器件的成型压力、预烧和烧结阶段的压力分别为200和0.01 MPa时,驱动器件的应变迟滞小于百分之一,并且驱动特性优异.

关键词: 压延法, PMN-PT, 叠层型驱动器件, 应变迟滞, 弛豫铁电体

Abstract: PMN-PT electrostrictive ceramics were prepared by columbite method, and their electrostrictive properties were investigated. The conditions for preparing the stack actuator by ceramic thick films and its properties were investigated. The results showed that the strain hysteresis of 0.94PMN-0.06PT is the lowest. The stack ceramic thick films prepared by the rolling process have high densities and good properties. When the forming pressure and the pressure during calcining and sintering are 200 MPa and 0.01 MPa, respectively, for the fabrication of stack actuator, the strain hysteresis of 0.94PMN-0.06PT stack actuator is lower than 1% and the actuator has good working properties.

中图分类号: