东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (5): 727-730.DOI: -

• 论著 • 上一篇    下一篇

电弧离子镀制备NiCrAlY涂层及其阻尼性能

杜广煜;谭祯;巴德纯;孙伟;   

  1. 东北大学机械工程与自动化学院;沈阳广播电视大学;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学青年基金资助项目(51005043);;

Preparation and damping properties of NiCrAlY coating by arc ion plating

Du, Guang-Yu (1); Tan, Zhen (1); Ba, De-Chun (1); Sun, Wei (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China; (2) Shenyang Radio and TV University, Shenyang 110003, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Ba, D.-C.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

709

摘要： 采用电弧离子镀的方式在不锈钢基片上制备了NiCrAlY涂层.对涂层样品进行了物相分析,表面形貌观察,测定微区化学成分,储能模量和损耗模量.结果表明,利用电弧离子镀的方法可以在不锈钢基底上获得均匀的NiCrAlY涂层.制备过程中的弧电流变化对涂层的表面形貌和化学成分有一定的影响,对涂层的物相结构影响不大.为研究NiCrAlY涂层的阻尼特性,通过储能模量和损耗模量的测试结果得到涂层样品的阻尼性能,结果表明NiCrAlY涂层能明显地提高基底的阻尼性能.

关键词: 电弧离子镀, NiCrAlY涂层, 阻尼性能, 弧电流

Abstract: NiCrAlY coatings were prepared on stainless steel substrates by arc ion plating technique. The coating samples were tested in phase, surface morphology, micro-determination chemical composition, storage modulus and loss modulus. The results showed that uniform NiCrAlY coating can be fabricated on steel substrate by arc ion plating technique. The variation of arc current during the preparation influenced the surface topography and chemical constitution of the coatings to a certain extent, while the influence on the sample phases was not observed. The testing results of storage modulus and loss modulus were obtained to study the damping characteristics of NiCrAlY coatings. It approved that the damping properties of the substrates are prominently ameliorated by NiCrAlY coating.

中图分类号: