东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (8): 1160-1163.DOI: 10.12068/j.issn.1005-3026.2015.08.021

• 机械工程 • 上一篇    下一篇

缸套-活塞间隙与振动信号关联维数的关系评价

郭立新， 李正守   

  1. (东北大学 机械工程与自动化学院， 辽宁 沈阳110819)
  • 收稿日期:2014-07-11 修回日期:2014-07-11 出版日期:2015-08-15 发布日期:2015-08-28
  • 通讯作者: 郭立新
  • 作者简介:郭立新(1968-)，男，辽宁沈阳人，东北大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51275082);中央高校基本科研业务费专项资金资助项目(N130403009).

Evaluation of Correlation Dimensions of Engine Cylinder-Piston Clearance and Vibration Signal

GUO Li-xin， LI Zheng-shou   

  1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China.
  • Received:2014-07-11 Revised:2014-07-11 Online:2015-08-15 Published:2015-08-28
  • Contact: GUO Li-xin
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

563

摘要： 利用发动机气缸套振动信号特征评价气缸套-活塞组件磨损状态，建立了发动机气缸套、活塞、曲柄和连杆机构的动力学模型并进行了动力学仿真.然后又进行了气缸套表面振动分析，并对所得到的振动模拟信号进行了基于关联维数的信号特征评价.结果表明，随气缸套-活塞组件磨损间隙的增加，振动信号幅值增大，气缸套表面振动加速度信号的自相关程度变大，气缸套表面振动信号的关联维数有下降的趋势，这些关联性可以作为发动机气缸套-活塞组件磨损状态评价的特征量.

关键词: 发动机, 振动信号, 磨损间隙, 关联维数, 特征分析

Abstract: In order to evaluate the wear status of cylinder liner-piston components by using engine cylinder liners’ vibration signal features， this study established a dynamic model of cylinder liner， piston， crank and connecting rod of the engine and carried out its dynamic simulation. Then the vibration analysis of the cylinder liner surfaces was conducted， and the correlation dimension-based signal features of the simulated vibration signals were evaluated. The analytical results showed that when the cylinder-piston wear clearance increases， the vibration signal amplitude increases， the self-correlation degree also increases， and the correlation dimension of the cylinder liner surfaces’ vibration signal decreases. These correlation dimensions can serve as feature indexes to evaluate the wear status of engine cylinder liner-piston components.

Key words: engine, vibration signal, wear clearance, correlation dimension, feature analysis

中图分类号: