[1]Elmahallawi I，Abdelkarim R，Naguib A.Evaluation of effect of chromium on wear performance of high manganese steel ［J］. Materials Science & Technology，2013，17(11):1385-1390.
[2]Ding C G.Study on the mechanical behavior and microscopic mechanism of explosive working of high-manganese steel ［J］.Advanced Materials Research，2011，239/240/241/242(1):506-512.
[3]Wen Y H， Peng H B， Si H T，et al.A novel high manganese austenitic steel with higher work hardening capacity and much lower impact deformation than Hadfield manganese steel ［J］.Materials & Design， 2014， 55(6):798-804.
[4]Kalandyk B，Tecza G，Zapaｌa R，et al.Cast high-manganese steel the effect of microstructure on abrasive wear behavior in Miller test ［J］.Archives of Foundry Engineering，2015，15(2):35-38.
[5]Seyedrezai H，Pilkey A K，Boyd J D.Effect of pre-IC annealing treatments on the final microstructure and work hardening behavior of a dual-phase steel ［J］.Materials Science & Engineering:A，2014，594(2):178-188.
[6]Ahmad E，Manzoor T，Ziai M M A，et al.Effect of martensite morphology on tensile deformation of dual-phase steel ［J］. Journal of Materials Engineering & Performance，2011，21(3):1-6.
[7]Shahriary M S，Koohbor B，Ahadi K，et al.The effect of dynamic strain aging on room temperature mechanical properties of high martensite dual phase (HMDP) steel ［J］. Materials Science & Engineering:A，2012，550(6):325-332.
[8]陈俊丹，莫文林，王培，等.回火温度对 42CrMo 钢冲击韧性的影响［J］.金属学报， 2012， 48(10): 1186-1193.(Chen Jun-dan，Mo Wen-lin，Wang Pei，et al.Effects of temperature on the impact toughness of steel 42CrMo ［J］. Acta Metallurgica Sinica，2012，48(10):1186-1193.)
[9]崔忠圻，刘北兴.金属学与热处理原理［M］.哈尔滨: 哈尔滨工业大学出版社，2007.(Cui Zhong-qi，Liu Bei-xing.Metallurgy and heat treatment theory［M］.Harbin:Harbin Institute of Technology Press，2007.)
[10]王平， 杨峥， 康沫狂.等温淬火组织中残余奥氏体回火转变的研究［J］.航空材料学报，1990，2(2):8-15.(Wang Ping，Yang Zheng，Kang Mo-kuang.The investigation of tempering transformation of retained quenching austenite in isothermal quenching microstructure ［J］.Journal of Aeronautical Materials，1990，2(2): 8-15.)
[11]Zhang H，Bai B Z，Fang H S.A Mn-series of oil-quenched super-strength bainitic steel with high harden ability ［J］. Journal of Iron and Steel Research，2010，17(5):38-43.
[12]Larbi A B C，Cherif A， Tarres M A.Improvement of the adhesive wear resistance of steel by nitriding quantified by the energy dissipated in friction ［J］.Wear， 2005， 258(5/6):712-718.
[13]Zhang J，Li H.Influence of manganese phosphating on wear resistance of steel piston material under boundary lubrication condition ［J］.Surface & Coatings Technology，2016，304:530-536.(上接第649页)
[3]Xie J，Fu H，Zhang Z，et al.Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fe-6.5wt.%Si alloy at intermediate temperatures［J］.Intermetallics， 2012，23:20-26.
[4]Ros-Yanez T，Houbaert Y，Fischer O，et al.Production of high silicon steel for electrical applications by thermomechanical processing［J］.Journal of Materials Processing Technology， 2003，143:916-921.
[5]林均品，叶丰，陈国良，等.6.5 wt%Si高硅钢冷轧薄板制备工艺结构和性能［J］.前沿科学，2007(2):13-26.(Lin Jun-pin，Ye Feng，Chen Guo-liang，et al.Fabrication technology，micro structures and properties of Fe-6.5 wt.% Si alloy sheets by cold rolling［J］.Frontier Science，2017(2):13-26.)
[6]刘璐，杨平，秦镜，等.高硅钢温轧过程压下率及中间退火对组织和织构的影响［J］.电子显微学报， 2013，32(6):459-466.(Liu Lu，Yang Ping，Qin Jing，et al.Effects of rolling reduction and inter mediate annealing on the microstructure and texture of 6.5 wt.% Si electric steel during warm rolling［J］.Journal of Chinese Electron Microscopy Society，2013，32(6):459-466.)
[7]Sha Y H，Sun C，Zhang F，et al.Strong cube recrystallization texture in silicon steel by twin-roll casting process［J］.Acta Materialia，2014，76:106-117.
[8]Xie J，Fu H，Zhang Z，et al.Deformation twinning in an Fe-6.5 wt.% Si alloy with columnar grains during intermediate temperature compression［J］.Materials Science and Engineering:A，2012，538:315-319.
[9]Inagaki H.Stable end orientations in the rolling textures of the polycrystalline iron［J］.Zeitschriftfur Metallkunde， 1987，78:431-439.
[10]Quadir M Z，Duggan B J.Deformation banding and recrystallization of α fibre components in heavily rolled IF steel［J］.Acta Materialia，2004，52(13):4011-4021.