东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2009, Vol. 30 ›› Issue (3): 329-332+353.DOI: -

• 论著 • 上一篇    下一篇

基于间隙理念的钢丝绳产品结构参数求解方法

庞哈利;杜素忠;   

  1. 东北大学信息科学与工程学院;中冶京诚工程技术有限公司;
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2009-03-15 发布日期:2013-06-22
  • 通讯作者: Du, S.-Z.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(5057038)

Clearance-based method of designing and solving structural parameters of steel wire rope

Pang, Ha-Li (1); Du, Su-Zhong (2)   

  1. (1) School of Information Science and Engineering, Northeastern University, Shenyang 110004, China; (2) MCC Capital Engineering and Research Incorporation Limited, Beijing 100176, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2009-03-15 Published:2013-06-22
  • Contact: Du, S.-Z.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

767

摘要： 基于钢丝绳间隙设计理念提出一种用于钢丝绳结构设计参数求解的新方法.在设计阶段考虑构成钢丝绳的股与钢丝的捻制变形以及钢丝绳结构与加工工艺等多种约束,采用渐进逼近的方式对捻距倍数、间隙要求、结构参数等多项指标进行优化计算,克服了传统设计方法中进行参数设计时不考虑生产工艺约束,造成设计与生产脱节的缺点.通过一种复合钢丝绳产品的设计案例,表明了该设计方法的有效性,计算出的设计参数与实际生产情况相吻合,能够有效指导生产实践.

关键词: 钢丝绳, 优化设计, 结构参数, 间隙, 捻制仿真

Abstract: A clearance-based method of designing and solving structural parameters of steel wire rope was proposed. Considering twisting direction of strands and wires, producing technique and structure of rope in design process, an approach of stepwise nearness was adopted to optimize the lay of wires, clearances between wires and strands and other structural parameters. The proposed method avoids disadvantage of traditional design method that does not consider the producing technique constraints and, as a result, the design may not accord with practice. An actual design example of a complicated steel wire rope was presented to illustrate the effectiveness of proposed method, and design results accord with practice and can guide production effectively.

中图分类号: