基于阈值的车联网信标传输功率控制算法

doi:10.12068/j.issn.1005-3026.2017.03.006

东北大学学报:自然科学版 ›› 2017, Vol. 38 ›› Issue (3): 331-334.DOI: 10.12068/j.issn.1005-3026.2017.03.006

基于阈值的车联网信标传输功率控制算法

莫元富^1,2，于德新¹，包赛男²，高书涛¹

(1. 吉林大学交通学院，吉林长春130022; 2. 中国汽车工程研究院，重庆401122)

收稿日期:2015-10-19 修回日期:2015-10-19 出版日期:2017-03-15 发布日期:2017-03-24
通讯作者: 莫元富
作者简介:莫元富(1984-)，男，辽宁大连人，吉林大学博士研究生；于德新(1972-)，男，吉林长春人，吉林大学教授，博士生导师.
基金资助:
国家高技术研究发展计划项目(2014BAG03B03).

Beacon Transmission Power Control Algorithm Based on the Preset Threshold in VANETs

MO Yuan-fu^1,2， YU De-xin¹， BAO Sai-nan²， GAO Shu-tao¹

1. College of Transportation， Jilin University， Changchun 130022， China; 2.China Automotive Engineering Research Institute Co.， Ltd.， Chongqing 401122， China.

Received:2015-10-19 Revised:2015-10-19 Online:2017-03-15 Published:2017-03-24
Contact: MO Yuan-fu
About author:-
Supported by:
-

摘要/Abstract

摘要： 研究了基于阈值的车联网信标传输功率控制算法.在保证网络最大连通性前提下，通过预设信道负载阈值，规定信道负载的合理区间，根据阈值调整目标节点载波侦测范围内所有车辆的信标传输功率，将信道负载控制在一定范围内，从而避免信道拥塞.通过仿真八车道高速公路基本路段和实际行车实验，对算法进行了验证及相关分析.结果表明该算法能有效地控制信道负载，避免信道拥塞，增强了车载网络无线信标传输的稳定性和健壮性.

关键词: 智能交通, 功率控制算法, 信道负载, 预设阈值, 车联网

Abstract: Beacon transmission power control algorithm based on the preset threshold was put forward in vehicle ad-hoc networks (VANETs). First， according to the preset channel load threshold， a reasonable channel load interval is adjusted to ensure that all the nodes transmit beacon messages. Based on the beacon transmission power of all the vehicles in the carrier sensing range of the target node， the channel load is controlled within a certain range to avoid channel congestion. Then， by simulating the basic sections of eight-lane highways and actual road driving tests， the beacon transmission power control algorithm based on the preset threshold is verified with the correlation analysis. The experimental results show that this power control algorithm can effectively control channel load， avoid channel congestion， and enhance the stability and robustness of wireless beacon message transmission in VANETs.

Key words: intelligent transportation, power control algorithm, channel load, preset threshold, vehicle ad-hoc network (VANET)

中图分类号:

U491

莫元富，于德新，包赛男，高书涛. 基于阈值的车联网信标传输功率控制算法[J]. 东北大学学报:自然科学版, 2017, 38(3): 331-334.

MO Yuan-fu， YU De-xin， BAO Sai-nan， GAO Shu-tao. Beacon Transmission Power Control Algorithm Based on the Preset Threshold in VANETs[J]. Journal of Northeastern University Natural Science, 2017, 38(3): 331-334.

参考文献

[1]Hartenstein H，Laterteaux K P.Vehicular applications and inter-networking technologies［M］.Atrium:John and Sons，Publishing Limited，2010.
[2]Qureshi K N，Abdullah A H.Congestion control scheduling scheme for vehicular networks［C］//Information Technology and Multimedia (ICIMU)，2014 International Conference.Putrajaya，2014:35-36.
[3]Sepulcre M，Gozalvez J，Altintas O，et al.Adaptive beaconing for congestion and awareness control in vehicular networks［C］// Vehicular Networking Conference (VNC)，IEEE.Paderborn，2014.
[4]唐伦，王晨梦，陈前斌.车载自组织网络中基于时分复用的异步多信道MAC协议［J］.计算机学报，2015，38(3):673-684.(Tang Lun，Wang Chen-meng，Chen Qian-bin.An asynchronous multi-channel MAC protocol based on TDMA in vehicular ad-hoc network［J］.Chinese Journal of Computers，2015，38(3):673-684.)
[5]孙全.基于网络编码的车联网信标广播方案研究［D］.南京:南京邮电大学，2014.(Sun Quan.Research on beacon broadcast algorithm in vehicular ad hoc networks based on network coding［D］.Nanjing:Nanjing University of Posts and Teleco-mmunications，2014.)
[6]胡荣娜，郭爱煌.车联网中基于功率控制的传输可靠性算法［J］.计算机应用，2015，35(6):1523-1526.(Hu Rong-na，Guo Ai-huang.Transmission reliability algorithm based on power control in Internet of vehicles［J］.Journal of Computer Applications，2015，35(6):1523-1526.)
[7]Artimy M，Roberson W，Phillips W.Assignment of dynamic transmission range based on estimation of vehicle density［C］//Proceeding of the 5th ACM International Workshop on Vehicular Ad Hoc Networks.Cologne，2010:41-45.
[8]Caizzone G，Giacomazzi P，Musumeci L，et al.A power control algorithm with high channel availability for vehicular ad-hoc networks［C］//Proceedings of the 43th IEEE International Conference on Communications.Seoul，2009:3321-3323.
[9]Khorakhum C，Busche H，Rohling H.Congestion control for VANETs based on power or rate adaptation［C］// Proceedings of the 6th International Workshop on Intelligent Transportation.Hamburg，2011.
[10]Guo W J，Huang I S，Sun J，et al.Delay-aware reliable broadcast scheme based on power control for VANETs［J］.The Journal of China Universities of Posts and Teleco-mmunications，2014，21(1):26-35.

基于阈值的车联网信标传输功率控制算法

Beacon Transmission Power Control Algorithm Based on the Preset Threshold in VANETs

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	茹敬雨，贾子熙，吴成东. 一种基于阳光的运动轨迹简化算法[J]. 东北大学学报:自然科学版, 2019, 40(8): 1070-1075.
[2]	赵海，田婷婷，樊景超，刘鹏. 一种分布式车联网多跳信息广播协议[J]. 东北大学学报:自然科学版, 2014, 35(9): 1244-1248.
[3]	赵海，彭海霞，朱剑，李大舟. 基于组确认机制的车联网中最佳中继节点的选择[J]. 东北大学学报:自然科学版, 2013, 34(1): 35-39.
[4]	吴成东;刘濛;张云洲;楚好;. 复杂场景下运动车辆实时动态自适应检测方法[J]. 东北大学学报(自然科学版), 2009, 30(6): 769-772.
[5]	刘士新;冯海兰;. 动态车辆路径问题的优化方法[J]. 东北大学学报(自然科学版), 2008, 29(4): 484-487.