超声滚压微锻造增材件表面力学性能

doi:10.12068/j.issn.1005-3026.2023.05.004

东北大学学报（自然科学版） ›› 2023, Vol. 44 ›› Issue (5): 634-641.DOI: 10.12068/j.issn.1005-3026.2023.05.004

超声滚压微锻造增材件表面力学性能

任朝晖，李竺鸿，王云贺，张梓婷

(东北大学机械工程与自动化学院，辽宁沈阳110819)

发布日期:2023-05-24
通讯作者: 任朝晖
作者简介:任朝晖(1968-)，男，辽宁沈阳人，东北大学教授，博士生导师.
基金资助:
国家重点研发计划项目(2017YFB1103700).

Surface Mechanical Properties of Ultrasonic Rolling Micro-forging Additive Manufactured Parts

REN Zhao-hui， LI Zhu-hong， WANG Yun-he， ZHANG Zi-ting

School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China.

Published:2023-05-24
Contact: REN Zhao-hui
About author:-
Supported by:
-

摘要/Abstract

摘要： 增材制造Ti-6Al-4V钛合金构件时，易出现裂纹、表面粗糙度大等缺陷.为了解决这一问题，将应用于表面强化处理的超声滚压微锻造工艺与增材制造过程相结合，通过有限元软件模拟了激光熔丝增材制造及冷却过程，并分析了超声滚压微锻造加工对增材件表面力学性能的影响.结果表明:在经过超声滚压微锻造加工后，增材件残余应力由拉应力转变为较大的压应力，有效降低了增材件产生裂纹等缺陷的风险，同时，加工后的增材件表面等效塑性应变增大，表面显微硬度提高，且超声滚压微锻造加工对滚压头接触区域影响最大.

关键词: Ti-6Al-4V钛合金；增材件；超声滚压微锻造；表面力学性能

Abstract: Defects such as cracks and high surface roughness are likely to occur in the additive manufacturing of Ti-6Al-4V titanium alloy parts. In order to solve this problem， the ultrasonic rolling micro-forging technology， which is applied in surface strengthening， is combined with the additive manufacturing process. The process of laser fuse additive manufacturing and cooling is simulated by the finite element software， and the effect of ultrasonic rolling micro-forging on the mechanical properties of the additive part surface is analyzed. The results show that the residual stress changes from tensile stress to compressive stress after ultrasonic rolling micro-forging， which effectively reduces the risk of defects such as cracks in additive parts. Meanwhile， the surface equivalent plastic strain and surface micro-hardness of the processed additive increase. In addition， ultrasonic rolling micro-forging has the greatest influence on the contact area of the rolling head.

Key words: Ti-6Al-4V titanium alloy; additive part; ultrasonic rolling micro-forging; surface mechanical property

中图分类号:

TH142.2

任朝晖，李竺鸿，王云贺，张梓婷. 超声滚压微锻造增材件表面力学性能[J]. 东北大学学报（自然科学版）, 2023, 44(5): 634-641.

REN Zhao-hui， LI Zhu-hong， WANG Yun-he， ZHANG Zi-ting. Surface Mechanical Properties of Ultrasonic Rolling Micro-forging Additive Manufactured Parts[J]. Journal of Northeastern University(Natural Science), 2023, 44(5): 634-641.

参考文献

[1]谭伟，杨新俊，周新.超声冲击改善奥氏体不锈钢表面状态的数值分析［J］.化工装备技术，2017，38(4):20-27.(Tan Wei，Yang Xin-jun，Zhou Xin.Numerical analysis of ultrasonic impact treatment to improve the surface state of austenitic stainless steel S30408［J］.Chemical Equipment Technology，2017，38(4):20-27.)
[2]Zhao X S，Zhao D X，Hu W J，et al.Manufacturing of high-precision surface micro-structures on stainless steel by ultrasonic impact peening［J］.The International Journal of Advanced Manufacturing Technology，2021，116: 915-930.
[3]马腾，宋晓云，叶文君，等.超声冲击处理对TA15钛合金板材焊缝残余应力的影响［J］.钛工业进展，2017，34(1):26-28.(Ma Teng，Song Xiao-yun，Ye Wen-jun，et al.Effect of ultrasonic impact treatment on the distribution of residual stress in welds of TA15 titanium alloy sheet［J］.Titanium Industry Progress，2017，34(1):26-28.)
[4]Yildirim H C，Marquis G B，Barsoum Z.Fatigue assessment of high frequency mechanical impact(HFMI)-improved fillet welds by local approaches［J］.International Journal of Fatigue，2013，52(1):57-67.
[5]Ye H，Ye K，Guo B G，et al.Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on micro-structural and mechanical properties in Ti-6Al-4V alloy［J］.Materials Characterization，2020，162:110187.
[6]Korzynski M.Modeling and experimental validation of the force surface roughness relation for smoothing burnishing with a spherical tool［J］.International Journal of Machine Tools & Manufacture，2007，47(12/13):1956-1964.
[7]Zhang M，Deng J，Liu Z，et al.Investigation into contributions of static and dynamic loads to compressive residual stress fields caused by ultrasonic surface rolling［J］.International Journal of Mechanical Sciences，2019，163:105114.
[8]Okawa T，Shimanuki H，Funatsu Y，et al.Effect of preload and stress ratio on fatigue strength of welded joints improved by ultrasonic impact treatment［J］.Welding in the World，2013，57(2):235-241.
[9]Trudel E，Walker P，Nosir S，et al.Experimental optimization for fatigue life maximization of additively manufactured Ti-6Al-4V alloy employing ultrasonic impact treatment［J］.Journal of Materials Engineering and Performance，2021，30(4):2806-2821.
[10]武永，邓威，刘恺，等.层间超声冲击对TIG电弧增材制造2219铝合金组织和力学性能的影响［J］.航空科学技术，2021，32(11): 80-86.(Wu Yong，Deng Wei，Liu Kai，et al.Effect of interlayer ultrasonic peening on the microstructure and mechanical properties of 2219 aluminum alloy by TIG wire arc additive manufacturing［J］.Aeronautical Science and Technology，2021，32(11):80-86.)
[11]施宇豪.激光加热辅助条件下的钛合金切削过程分析与建模［D］.南京: 南京航空航天大学，2014.(Shi Yu-hao.Analysis and modeling of titanium alloy laser heating assisted milling process［D］.Nanjing: Nanjing University of Aeronautics and Astronautics，2014.)
[12]Goldak J，Chakravarti A，Bibby M.A new finite-element model for welding heat sources［J］.Metallurgical Transactions B，1984，15(2):299-305.
[13]Wen S，Shin Y C.Modeling of the off-axis high power diode laser cladding process［J］.Journal of Heat Transfer，2011，133(3):031007.
[14]Hao M Z，Sun Y W.A FEM model for simulating temperature field in coaxial laser cladding of Ti-6Al-4V alloy using an inverse modeling approach［J］.International Journal of Heat and Mass Transfer，2013，64: 352-360.
[15]Johnson G R，Cook W H.Fracture characteristics of three metals subjected to various strains，strain rates，temperatures and pressures［J］.Engineering Fracture Mechanics，1985，21(1):31-48.
[16]Fu C H，Guo Y B.Three-dimensional temperature gradient mechanism in selective laser melting of Ti-6Al-4V［J］.Journal of Manufacturing Science and Engineering，2014，136(6):061004.
[17]Liang W，Murakawa H，Deng D.Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start［J］.Materials and Design，2015，67: 303-312.
[18]赵婧，夏伟，李风雷，等.滚压表面强化机理的研究现状与进展［J］.工具技术，2010，44(11):3-8.(Zhao Jing，Xia Wei，Li Feng-lei，et al.Research status and developing tendency of burnishing mechanism［J］.Tool Technology，2010，44(11):3-8.)(上接第633页)

超声滚压微锻造增材件表面力学性能

Surface Mechanical Properties of Ultrasonic Rolling Micro-forging Additive Manufactured Parts

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价