混合滤波与改进双边滤波的点云去噪算法

doi:10.12068/j.issn.1005-3026.2023.05.010

东北大学学报（自然科学版） ›› 2023, Vol. 44 ›› Issue (5): 682-688.DOI: 10.12068/j.issn.1005-3026.2023.05.010

混合滤波与改进双边滤波的点云去噪算法

刘永生¹，蔡世阳^1,2，陈一馨¹，徐志博¹

(1.长安大学道路施工技术与装备教育部重点实验室，陕西西安710064； 2.比亚迪汽车有限公司，陕西西安710118)

发布日期:2023-05-24
通讯作者: 刘永生
作者简介:刘永生(1985-)，男，山东菏泽人，长安大学讲师，博士.
基金资助:
陕西省科技重大专项(2018zdzx01-01-01)；陕西省自然科学基金资助项目(2022JM-295，2022JQ-576).

Point Cloud Denoising Algorithm Based on Hybrid Filtering and Improved Bilateral Filtering

LIU Yong-sheng¹， CAI Shi-yang^1,2， CHEN Yi-xin¹， XU Zhi-bo¹

1. Key Laboratory of Road Construction Technology & Equipment， Ministry of Education， Chang’an University， Xi’an 710064， China; 2. BYD Automotive Co.， Ltd.， Xi’an 710118， China.

Published:2023-05-24
Contact: CHEN Yi-xin
About author:-
Supported by:
-

摘要/Abstract

摘要： 激光扫描获取的曲面零件点云中包含的噪声点将影响零件的曲面拟合精度.提出了一种根据噪声分类分步降噪及光顺方法，利用kd tree结合K-means聚类算法去除离群点噪声，引入采样点曲率改进双边滤波因子，对非离群点噪声进行光顺.利用该方法对液力变矩器导轮叶片点云进行去噪，并与利用三坐标测量机接触式测量获得的叶片局部测量结果配准比较.实验结果表明，70%以上的接触式扫描测量点与利用本文方法去噪后的叶片点云之间的偏差在±10μm之间.表明该方法可以很好地保留扫描物体的几何特征，获得的点云模型能够满足后续模型重建的精度要求.

关键词: 点云处理；点云去噪；K-means聚类；改进双边滤波；液力变矩器

Abstract: The point cloud of curved parts obtained by laser scanning contains noise points， that may affect the surface fitting accuracy of the parts. A denoising and smoothing method based on noise classification was proposed. The kd tree algorithm and K-means clustering algorithm were combined to remove the outlier noise. The curvature of the sampling points was substituted to improve the bilateral filter factor， and the improved bilateral filtering algorithm was used to smooth the non-outlier noise. The proposed method was used to denoise the point cloud of the blade of the guide pulley of the hydraulic torque converter， and compared with the measurement results obtained by coordinate measuring machine. The experimental results showed that the deviations between more than 70% of the measurement points and the denoised point cloud is within ± 10μm. It was found that the proposed method can well preserve the geometric features of the scanned object， and the denoised point cloud can meet the accuracy requirements of the model reconstruction.

Key words: point cloud processing; point cloud denoising; K-means clustering; improved bilateral filtering; hydraulic torque converter

中图分类号:

TP391.7

刘永生，蔡世阳，陈一馨，徐志博. 混合滤波与改进双边滤波的点云去噪算法[J]. 东北大学学报（自然科学版）, 2023, 44(5): 682-688.

LIU Yong-sheng， CAI Shi-yang， CHEN Yi-xin， XU Zhi-bo. Point Cloud Denoising Algorithm Based on Hybrid Filtering and Improved Bilateral Filtering[J]. Journal of Northeastern University(Natural Science), 2023, 44(5): 682-688.

参考文献

[1]Yu J Z，Wei M Q，Qin J，et al.Feature-preserving mesh denoising via normal guided quadric error metrics［J］.Optics and Lasers in Engineering，2014，62(6):57-68.
[2]焦亚男，马杰，钟斌斌.一种基于尺度变化的点云并行去噪方法［J］.武汉大学学报(工学版)，2021，54(3):277-282.(Jiao Ya-nan，Ma Jie，Zhong Bin-bin.Point cloud parallel denoising algorithms based on scale change［J］.Engineering Journal of Wuhan University，2021，54(3):277-282.)
[3]Wei M Q，Yu J Z，Pang W M，et al.Bi-normal filtering for mesh denoising［J］.IEEE Transactions on Visualization and Computer Graphics，2015，21(1):43-55.
[4]Zhang Y C，Wang X J，Li Q，et al.A new section line extraction method of ring forgings based on normal vector and L₁-median［J］.Measurement，2021，184:109894.
[5]Sun Y J，Schaefer S，Wang W P.Denoising point sets via L₀ minimization［J］.Computer Aided Geometric Design，2015，35/36:2-15.
[6]Zheng Y L，Li G Q，Wu S H，et al.Guided point cloud denoising via sharp feature skeletons［J］.The Visual Computer，2017，33:857-867.
[7]夏毅敏，郭子泺，邓朝辉，等.基于点云的TBM隧道成型质量检测方法及应用［J］.东北大学学报(自然科学版)，2021，42(6):864-870.(Xia Yi-min，Guo Zi-luo，Deng Chao-hui，et al.TBM tunnel shaping quality detection method and its application based on point cloud［J］.Journal of Northeastern University(Natural Science)，2021，42(6):864-870.)
[8]Li B，Schnabel R，Klein R，et al.Robust normal estimation for point clouds with sharp features［J］.Computers & Graphics，2010，34(2):94-106.
[9]Digne J，de Franchis C.The bilateral filter for point clouds［J］.Image Processing on Line，2017，7:278-287.
[10]Kawasaki T，Jayaraman P K，Shida K，et al.An image processing approach to feature-preserving B-spline surface fairing［J］.Computer-Aided Design，2018，99:1-10.
[11]Zhang F，Zhang C，Yang H M，et al.Point cloud denoising with principal component analysis and a novel bilateral filter［J］.Traitement Du Signal，2019，36(5):393-398.
[12]Zou B C，Qiu H D，Lu Y F.Point cloud reduction and denoising based on optimized downsampling and bilateral filtering［J］.IEEE Access，2020，8:136316-136326.
[13]秦亚光，罗周全，汪伟，等.采空区三维激光扫描点云数据处理技术［J］.东北大学学报(自然科学版) 2016，37(11):1635-1639.(Qin Ya-guang，Luo Zhou-quan，Wang Wei，et al.Cavity three-dimensional laser scanning point cloud data processing technology［J］.Journal of Northeastern University(Natural Science)，2016，37(11):1635-1639.)
[14]Tsuchie S，Higashi M.Surface mesh denoising with normal tensor framework［J］.Graphical Models，2012，74:130-139.
[15]Li H B，Li Y B，Yu R X，et al.Surface reconstruction from unorganized points with L₀ gradient minimization［J］.Computer Vision and Image Understanding，2018，169:108-118.

混合滤波与改进双边滤波的点云去噪算法

Point Cloud Denoising Algorithm Based on Hybrid Filtering and Improved Bilateral Filtering

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	曲兴田，刘继明，杨旭，刘孝龙. 叶片型面快速测量方法及系统研究[J]. 东北大学学报:自然科学版, 2016, 37(2): 237-242.
[2]	巩亚东，赵晓旭，程军. TBM盘形滚刀破岩刃弧长研究分析[J]. 东北大学学报:自然科学版, 2015, 36(6): 838-842.