镍基单晶高温合金表面微阵列孔的制备方法及其实验研究

doi:10.12068/j.issn.1005-3026.2023.12.007

东北大学学报（自然科学版） ›› 2023, Vol. 44 ›› Issue (12): 1719-1725.DOI: 10.12068/j.issn.1005-3026.2023.12.007

镍基单晶高温合金表面微阵列孔的制备方法及其实验研究

孙瑶，唐本甲，巩亚东，李思慧

(东北大学机械工程与自动化学院，辽宁沈阳110819)

发布日期:2024-01-30
通讯作者: 孙瑶
作者简介:孙瑶(1990-)，女，辽宁锦州人，东北大学副教授；巩亚东(1958-)，男，辽宁本溪人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(52005092)；中央高校基本科研业务费专项资金资助项目(N2103013)；辽宁省科学技术基金资助项目(2021-BS-053).

Preparation Method and Experimental Study of Array Microholes on the Surface of Nickel-Based Single Crystal Superalloy

SUN Yao， TANG Ben-jia， GONG Ya-dong， LI Si-hui

School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China.

Published:2024-01-30
Contact: SUN Yao
About author:-
Supported by:
-

摘要/Abstract

摘要： 微小孔结构在航空航天、现代医疗、精密仪器等领域有着广泛的应用，但孔径尺寸微小且加工精度要求高，常规的接触式机械加工方式存在切削力致使孔精度较难控制.而电火花加工非接触和无宏观切削力的特点使其在微小孔加工中具有独特的优势.开展镍基单晶高温合金表面微阵列孔制备的实验研究，首先通过低速走丝电火花线切割方法结合精修工艺实现了边长小于340μm菱形微细阵列电极的高精度制备.采用所制备的微细阵列电极在镍基单晶高温合金表面进行微阵列孔加工，探究微阵列孔尺寸的一致性精度、孔壁的表面质量和电极损耗特点，揭示抬刀速度和抬刀模式对微阵列孔的孔壁粗糙度的影响规律，实现了镍基单晶高温合金表面微阵列孔的高效率高精度制备.

关键词: 微阵列孔；低速走丝电火花线切割；镍基单晶高温合金；表面粗糙度；电极损耗

Abstract: Micro hole structure has a wide range of applications in aerospace， modern medical， precision instruments and other fields， but the aperture size is small and the machining accuracy is high， and the cutting force of conventionally contact machining methods makes the hole accuracy difficult to control. However， the characteristics of non-contact and no macroscopic cutting force of EDM make it have unique advantages in the fabrication of micro holes. The experimental study on the preparation of array micro holes on the surface of nickel-based single crystal superalloy was carried out， firstly， the rhomboid array microelectrode with the average edge of less than 340μm was prepared by low speed wire electrical discharge machining (WEDM-LS) combined with finish trim cut. The forming accuracy， surface morphology and element change of the array microelectrode were further analyzed. The array microelectrode was used to process the array micro holes on the surface of nickel-based single crystal superalloy. The uniformity accuracy of the array micro holes， surface quality of the hole wall and electrode loss characteristic were investigated. The effect of cutter lifting speed and cutter lifting mode on the wall roughness of the array micro holes was revealed， which prepared array micro holes with high efficiency and high precision on nickel-based single crystal superalloy.

Key words: array micro holes; WEDM-LS; nickel base single crystal superalloy; surface roughness; electrode wear

中图分类号:

TG661

孙瑶，唐本甲，巩亚东，李思慧. 镍基单晶高温合金表面微阵列孔的制备方法及其实验研究[J]. 东北大学学报（自然科学版）, 2023, 44(12): 1719-1725.

SUN Yao， TANG Ben-jia， GONG Ya-dong， LI Si-hui. Preparation Method and Experimental Study of Array Microholes on the Surface of Nickel-Based Single Crystal Superalloy[J]. Journal of Northeastern University(Natural Science), 2023, 44(12): 1719-1725.

参考文献

[1]Imran M，Mativenga P T，Gholinia A，et al.Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys［J］.International Journal of Machine Tools & Manufacture，2014，76:49-60.
[2]温志勋，侯乃先，王佰智，等.镍基单晶涡轮冷却叶片力学性能表征技术研究新进展［J］.航空制造技术，2010，20:26-29.(Wen Zhi-xun，Hou Nai-xian，Wang Bai-zhi，et al.New progress in mechanical properties of nickel-based single crystal cooling turbine blade ［J］.Aeronautical Manufacturing Technology，2010，20:26-29.)
[3]巩亚东，张伟健，蔡明，等.镍基单晶高温合金磨削变质层工艺试验研究［J］东北大学学报(自然科学版)，2020，41(6):846-851.(Gong Ya-dong，Zhang Wei-jian，Cai Ming，et al.Experimental study on the grinding metamorphic layer of nickel-basad single crystal superalloy［J］.Journal of Northeastern University (Natural Science)，2020，41(6):846-851.)
[4]Pham D T，Dimov S S，Bigot S，et al.Micro EDM recent developments and research issues ［J］.Journal of Materials Processing Technology，2004，149(1):50-57.
[5]巩亚东，孙瑶，刘寅.低速单向走丝电火花线切割钛合金 TC4 表面粗糙度试验研究与建模［J］.兵工学报，2016，37(6):1058-1065.(Gong Ya-dong，Sun Yao，Liu Yin.Experimental investigation and modeling of three-dimensional surface roughness in LS-WEDM of TC4［J］.Acta Armamentarii，2016，37(6):1058-1065.)
[6]单子昭，周聪，陈根余，等超硬磨料砂轮不同介质中电火花修整试验研究［J］.金刚石与磨料磨具工程，2020，40(5):79-84.(Shan Zi-zhao，Zhou Cong，Chen Gen-yu，et al.Experimental study on electro-discharge dressing of super-abrasive grinding wheel using different dielectric［J］.Diamond & Abrasives Engineering，2020，40(5):79-84.)
[7]Sun Y，Jin L Y，Gong Y D，et al.Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM［J］.Journal of Manufacturing Processes，2022，73:799-814.
[8]Ahmad J Y S，Shinde S R.Machinability of carbon/epoxy composites by electrical discharge machining［J］.International Journal of Machining and Machinability of Materials，2016，18(1/2):3-17.
[9]王海艳，陶克新，金天，球头铣刀螺旋铣孔材料去除及孔形成过程分析［J］.东北大学学报(自然科学版)，2020，41(11):1602-1608.(Wang Hai-yan，Tao Ke-xin，Jin Tian.Analysis of material removal and hole formation process in ball helical milling process［J］.Journal of Northeastern University (Natural Science)，2020，41(11):1602-1608.)
[10]王志强，宫虎，房丰洲.双螺旋电极在深微孔电火花加工中的研究［J］.中南大学学报(自然科学版)， 2015， 46(8):2857-2862.(Wang Zhi-qiang，Gong Hu，Fang Feng-zhou.Micro hole machining using double helix electrodes in electro discharge machining［J］.Journal of Central South University(Science and Technology)，2015，46(8):2857-2862.)
[11]Meng L N，Wang A H，Wu Y，et al.Blind micro-hole array Ti6Al4V templates for carrying biomaterials fabricated by fiber laser drilling ［J］.Journal of Materials Processing Technology，2015，222:335-343.
[12]Li Z K，Bai J C，Cao Y，et al.Fabrication of microelectrode with large aspect ratio and precision machining of micro-hole array by micro-EDM ［J］.Journal of Materials Processing Technology，2019，268:70-79.
[13]Plaza S，Sanchez J A，Perez E，et al.Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode ［J］.Precision Engineering，2014，38(4):821-827.
[14]Wang M H，Bao Z Y，Wang X F，et al.Fabrication of disk microelectrode arrays and their application to micro-hole drilling using electrochemical micromachining ［J］.Precision Engineering，2016，46:184-192.
[15]王莉，周忠娇，张少华，等.镍基单晶高温合金冷热循环过程中圆孔周围裂纹萌生与扩展行为［J］.金属学报，2015，51(10):1273-1278.(Wang Li，Zhou Zhong-jiao，Zhang Shao-hua，et al.Crack initiation and propagation around holes of Ni-based single crystal superalloy during thermal fatigue cycle［J］.ACTA Metallurgica Sinica，2015，51(10):1273-1278.)

镍基单晶高温合金表面微阵列孔的制备方法及其实验研究

Preparation Method and Experimental Study of Array Microholes on the Surface of Nickel-Based Single Crystal Superalloy

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价

[1]	巩亚东，孟凡涛，孙瑶，于兴晨. 镍基单晶高温合金的微孔加工对比实验研究[J]. 东北大学学报:自然科学版, 2020, 41(1): 84-89.
[2]	祁阳，巩亚东，梁春游，李鹏飞. 数控机床故障分析与可靠性评价技术的研究[J]. 东北大学学报:自然科学版, 2019, 40(6): 831-834.
[3]	巩亚东，马晓腾，孙瑶. 基于响应曲面法电火花线切割回转零件实验研究[J]. 东北大学学报:自然科学版, 2018, 39(7): 1005-1010.
[4]	孙瑶，巩亚东，刘寅. 慢走丝电火花线切割TC4试验研究和参数优化[J]. 东北大学学报:自然科学版, 2016, 37(7): 979-983.