东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2005, Vol. 26 ›› Issue (3): 260-262.DOI: -

• 论著 • 上一篇    下一篇

利用温度梯度法合成硫化物

刘涛;于景坤;袁宇皓   

  1. 东北大学材料与冶金学院;东北大学材料与冶金学院;东北大学材料与冶金学院 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2005-03-15 发布日期:2013-06-24
  • 通讯作者: Yu, J.-K.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金;;

Synthesizing sulphides by temperature gradient method

Liu, Tao (1); Yu, Jing-Kun (1); Yuan, Yu-Hao (1)   

  1. (1) Sch. of Mat. and Metall., Northeastern Univ., Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-03-15 Published:2013-06-24
  • Contact: Yu, J.-K.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

753

摘要： 以金属镁、钛、锆和钨以及升华硫为原料,通过温度梯度法合成了硫化镁、硫化钛、硫化锆和硫化钨,并利用X射线衍射分析了合成物的矿物组成,研究了合成体系内升华硫的蒸发量与合成体系容积大小、合成温度以及合成体系抗压强度等参数间的关系·研究结果表明,在本实验条件下,合成体系内的最大升华硫蒸发量应为1 15g,并根据此硫蒸发量控制合成体系内的温度梯度和升温速度,安全且大量地合成了硫化镁、硫化钛、硫化锆和硫化钨,其质量分别为56 37,112 00,155 36和247 97g·

关键词: 温度梯度法, 升华硫, 硫化物, 矿物组成

Abstract: MgS, TiS2, ZrS2 and WS2 were synthesized by temperature gradient method using Mg, Ti, Zr, W and sublimed sulfur as raw materials. The mineral compositions of the synthesized sulfides as above were determined by X-ray diffraction. Relationships among the evaporating loss of sublimed sulfur and such parameters as volumetric size, synthesizing temperature and compression strength of the synthesized sulfides were studied. The results showed that the maximal evaporating loss of sublimed sulfur is 1.15 g in the synthesizing process under the same experimental conditions. Then, based on the evaporating loss of sublimed sulfur, the temperature gradient and heating rate in the synthesizing process were controlled, to synthesize safely large quantities of MgS, TiS2, ZrS2 and WS2 with their masses up to 56.37 g, 112.00 g, 155.36 g and 247.97 g respectively.

中图分类号: