东北大学学报(自然科学版) ›› 2005, Vol. 26 ›› Issue (5): 481-483.DOI: -

• 论著 • 上一篇    下一篇

双曲柄环板式针摆行星传动的齿形优化及运动仿真

金映丽;何卫东;李力行;丁津原   

  1. 东北大学机械工程与自动化学院;大连交通大学机械工程学院;大连交通大学机械工程学院;东北大学机械工程与自动化学院 辽宁沈阳 110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2005-05-15 发布日期:2013-06-24
  • 通讯作者: Jin, Y.-L.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50175011)

Tooth profile optimization and kinematic simulation of double crank ring-plate-type pin-cycloidal gear planetary drive

Jin, Ying-Li (1); He, Wei-Dong (2); Li, Li-Xing (2); Ding, Jin-Yuan (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China; (2) School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-05-15 Published:2013-06-24
  • Contact: Jin, Y.-L.
  • About author:-
  • Supported by:
    -

摘要: 基于VisualC++6.0,编制程序对摆线齿轮的齿形进行优化设计,改善了摆线齿轮的啮合状态,并计算出摆线齿轮和环板的多齿啮合情况、齿面接触状态等;可以初步判断减速器基本尺寸的合理性,提高了设计效率,实现了传统的机械设计不能完成的设计计算,减少了样机制造成本,同时本系统利用OpenGL丰富的图形API接口,模拟了传动的动态运动情况,直观动态地观察行星传动的啮合情况及运动情况·

关键词: 双曲柄环板, 针摆行星传动, 齿形优化, 运动仿真

Abstract: Based on the Visual C++ 6.0, the design of tooth profile of the cycloidal gear is optimally programmed to improve its engaging condition, thus calculating the multi-mesh and tooth face contact conditions between the cycloid gear and ring-plate. A judgement is preliminarily made that the basic dimensions of reducer are reasonable. The design efficiency is improved to realize the calculation available to simulating analysis, which the traditional mechanical design cannot do. Taking advantages of the plentiful graphic API interface for the OpenGL, a kinematic simulation is carried out for the drive, by which the gear engagement in the planetary drive system can be displayed directly for observation.

中图分类号: