东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2011, Vol. 32 ›› Issue (11): 1595-1598+1614.DOI: -

• 论著 • 上一篇    下一篇

真空还原精炼法制备低氧高钛铁合金

豆志河;张廷安;姚建明;赫冀成;   

  1. 东北大学多金属共生矿生态化利用教育部重点实验室;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50874027,50644016,50704011);;

Preparation of high titanium ferroalloy with low oxygen through vacuum reduction refining

Dou, Zhi-He (1); Zhang, Ting-An (1); Yao, Jian-Ming (1); He, Ji-Cheng (1)   

  1. (1) Key Laboratory of Ecological Utilization of Multi-metal Intergrown Ores, Ministry of Education, Northeastern University, Shenyang 110819, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Zhang, T.-A.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1128

摘要： 针对铝热还原法制备的高钛铁中氧含量高、夹杂多等缺点,提出了以铝热法高钛铁为原料进行真空还原精炼制备低氧高钛铁的新思路.研究了精炼温度、精炼渣等因素对精炼效果的影响,采用XRD,SEM及化学元素分析等手段对高钛铁合金进行了表征.结果表明:还原精炼后合金的微观结构均匀致密,夹杂物得到有效去除,氧含量急剧降低;2 000℃时以CaO-Al2O3为精炼渣制备的高钛铁合金中各元素的质量分数分别为钛74.5%,铁18.2%,铝2.17%,硅0.81%,氧3.20%,完全符合优质高钛铁的技术指标.

关键词: 低氧高钛铁, 真空还原精炼, 扫描电镜, 精炼渣

Abstract: To reduce oxygen content and inclusions in the high titanium ferroalloy prepared by the aluminum thermal reduction, the vacuum reduction refining method was used to prepare the low oxygen high titanium ferroalloy in which the high titanium ferroalloy prepared by aluminum thermal method was used as raw materials. Effects of the refining temperature and refining slags were studied. The high titanium ferroalloy was characterized by XRD, SEM and chemical elemental analysis. The results showed that the microstructure of the reduction refining alloy is uniform and compact, the inclusions in the alloy are effectively removed and the oxygen content decreases dramatically. The mass percent composition of Ti, Fe, Al, Si, O in the refined alloy prepared with CaO-Al2O3 as vefining slag at 2000°C is 74.5%, 18.2%, 2.17%, 0.81%, 3.20%, respectively, which is fully consistent with the technical indicators of the high quality high titanium ferroalloy.

中图分类号: