东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (11): 1542-1546.DOI: -

• 论著 • 上一篇    下一篇

热连轧液压活套不确定系统的滑模控制

王宏伟;王素欣;于驰;宫明龙;   

  1. 东北大学秦皇岛分校;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-01-25
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    国家自然科学基金青年基金资助项目(50901015);;

Sliding mode control for hydraulic looper uncertain system in hot strip mills

Wang, Hong-Wei (1); Wang, Su-Xin (1); Yu, Chi (1); Gong, Ming-Long (1)   

  1. (1) Northeastern University at Qinhuangdao, Qinhuangdao 066004, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-01-25
  • Contact: Wang, H.-W.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

590

摘要： 针对一类多输入多输出热连轧液压活套不确定系统设计了滑模控制器.首先利用特殊线性变换将原不确定系统化成标准形式,然后基于Lyapunov函数方法和线性矩阵不等式(LMI)技术给出了滑模面函数,根据滑模到达条件设计了一种新的控制策略,并且给出了理论性证明.最后仿真结果表明,该控制器可使活套控制系统获得较好的控制效果,有效地提高热轧带钢精轧机活套系统的控制精度,并使活套系统迅速达到平衡稳定状态.该控制器具有很强的鲁棒性能,非常适合于复杂的活套系统.

关键词: 液压活套, 热连轧, 滑模控制, 多输入多输出, 线性矩阵不等式

Abstract: For a class of multi-input multi-output (MIMO) hydraulic looper uncertain system in hot strip mills, a sliding mode controller was designed. First, the original uncertain system was turned into a standard model based on a particular linear transformation. Then, the sliding mode surface function was obtained by applying Lyapunov function approach and the linear matrix inequality (LMI) technique, and a novel sliding mode control (SMC) strategy was proposed and theoretically proved based on the sliding mode reaching conditions. Simulation results demonstrated that the proposed algorithm get much better control performance, and make the looper system come to a stable equilibrium state quickly. What's more, the control accuracy for looper system of hot strip finishing mills was also improved. This kind of control action has robust performance for looper and tension, which is suitable for the complex looper systems.

中图分类号: