正交变传动比面齿轮齿面法向偏差测量及分析

doi:10.12068/j.issn.1005-3026.2015.11.030

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (11): 1658-1662.DOI: 10.12068/j.issn.1005-3026.2015.11.030

正交变传动比面齿轮齿面法向偏差测量及分析

林超¹，曹喜军¹，王瑶¹，徐萍²

(1. 重庆大学机械传动国家重点实验室，重庆400044； 2. 西南计算机有限责任公司，重庆400060)

收稿日期:2014-11-10 修回日期:2014-11-10 出版日期:2015-11-15 发布日期:2015-11-10
通讯作者: 林超
作者简介:林超(1958-)，男，重庆人，重庆大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目 (51275537).

Normal Error of Tooth Surface Measurement and Analysis of Orthogonal Fluctuating Gear Ratio Face Gear

LIN Chao¹， CAO Xi-jun¹， WANG Yao¹， XU Ping²

1.The State Key Laboratory of Mechanical Transmission， Chongqing University，Chongqing 400044，China; 2. Southwest Computer Co.， Ltd.， Chongqing 400060， China.

Received:2014-11-10 Revised:2014-11-10 Online:2015-11-15 Published:2015-11-10
Contact: LIN Chao
About author:-
Supported by:
-

摘要/Abstract

摘要： 针对三轴数控精铣加工得到的正交变传动比面齿轮零件，提出了一种基于齿轮测量中心的正交变传动比面齿轮齿面法向偏差测量及分析方法.通过对理论齿面进行网格划分并在齿轮测量中心上完成对该齿轮零件的齿面测量，将测量获得的实际坐标数据与计算得出的理论坐标数据进行对比分析，从而得到了其实际齿面法向偏差，同时分析了该偏差的基本变化规律，最终实验结果验证了所建立的正交变传动比面齿轮齿面法向偏差测量及分析方法的可行性.

关键词: 正交变传动比面齿轮, 齿轮测量中心, 齿面法向偏差, 误差检测

Abstract: Aimed at orthogonal variable transmission ratio face gear machined by the 3-axis CNC， a solution of coordinate based on CNC gear measuring center was proposed to detect the normal error of tooth surface. A gridding of tooth surface was made and the theoretical coordinates and normal vectors of the grid nodes were calculated. The comparison with the result of the transmission test and the theoretical data obtained the deviations. At the same time， the fundamental change regularities of bias was analyzed. Finally， the results show that the approach presented is proved to be feasible.

Key words: orthogonal fluctuating gear ratio face gear, gear measuring center, normal deviation of tooth surface, error inspection

中图分类号:

TG86

林超，曹喜军，王瑶，徐萍. 正交变传动比面齿轮齿面法向偏差测量及分析[J]. 东北大学学报:自然科学版, 2015, 36(11): 1658-1662.

LIN Chao， CAO Xi-jun， WANG Yao， XU Ping. Normal Error of Tooth Surface Measurement and Analysis of Orthogonal Fluctuating Gear Ratio Face Gear[J]. Journal of Northeastern University Natural Science, 2015, 36(11): 1658-1662.

参考文献

[1]Lin C，Gong H，Nie N，et al.Geometry design three-dimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive［J］.Part C:Journal of Mechanical Engineering Science，2013，227 (4):779-793.
[2]唐德威，邓宗全，于红英，等.非圆齿轮的测绘设计方法研究［J］.哈尔滨工业大学学报，2005，37(5):581-583.(Tang De-wei，Deng Zong-quan，Yu Hong-ying，et al.Study on mapping design method of non-circular gear［J］.Journal of Harbin Institute of Technology，2005，37(5):581-583.)
[3]Guenther A.Interpretation of bevel gear topography measurements［J］.CIRP Annals - Manufacturing Technology，2011，60(1):551-554.
[4]Suh S H，Lee E S，Kim H C，et al.Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC［J］.International Journal of Machine Tools & Manufacture，2002，42(3):335-342.
[5]José S，Gerardo R，Sergio P，et al.Geometrical principles for analysing hypoidal gears in coordinate measuring machines:involutometry，protocols，data interpretation ［J］.Measurement，2012，45(10):2368-2375.
[6]林超，曾庆龙，聂玲，等.高阶椭圆锥齿轮齿距误差的三坐标测量方法［J］.重庆大学学报:自然科学版，2013，36(10):1-7.(Lin Chao，Zen Qin-long，Nie Ling，et al.Pitch error measurement of high-order oval bevel gear on three dimensional measuring maching［J］.Journal of Chongqing University:Natural Science，2013，36(10):1-7.)
[7]Litvin F L，Faydor L.Gear geometry and applied theory［M］.New York:Cambridge University Press，2004.
[8]Faydor L L，Alfonso F，Claudio Z，et al.Face-gear drive with spur involute pinion:geometry，generation by a worm，stress analysis［J］.Computer Methods in Applied Mechanics and Engineering，2002，191(25):2785-2813.
[9]王亚平，郑彦龙.三维测量软件系统中坐标系的建立方法［J］.工业计量，2004，14(6):27-30.(Wang Ya-ping，Zheng Yan-long.Creation method of coordinate system in 3- D measuring software system［J］.Industrial Measurement，2004，14(6):27-30.)
[10]Anke G，Karin K，Frank H，et al.Introduction of a new bevel gear measurement standard［J］.CIRP Annals - Manufacturing Technology，2013，62(1):515-518.

正交变传动比面齿轮齿面法向偏差测量及分析

Normal Error of Tooth Surface Measurement and Analysis of Orthogonal Fluctuating Gear Ratio Face Gear

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价