东北大学学报(自然科学版) ›› 2021, Vol. 42 ›› Issue (3): 401-408.DOI: 10.12068/j.issn.1005-3026.2021.03.015

• 机械工程 • 上一篇    下一篇

TBM掘进参数与不同岩性地层相关性分析

夏毅敏1,2, 柯杰1,2, 齐梦学3, 邓朝辉4   

  1. (1. 中南大学 高性能复杂制造国家重点实验室, 湖南 长沙410083; 2. 中南大学 机电工程学院, 湖南 长沙410083; 3. 中铁十八局集团隧道工程有限公司, 重庆400700; 4. 中铁第四勘察设计院集团有限公司, 湖北 武汉430063)
  • 收稿日期:2020-03-30 修回日期:2020-03-30 接受日期:2020-03-30 发布日期:2021-03-12
  • 通讯作者: 夏毅敏
  • 作者简介:夏毅敏(1967-),男,江西永新人,中南大学教授,博士生导师.
  • 基金资助:
    国家重点研发计划项目 (2017YFB1302600) ; 湖南省科技重大专项(湖南创新型省份建设专项经费资助,2019GK1010); 长沙市科技计划重大专项(kq1703022).

Correlation Analysis of TBM Operating Parameters and Different Lithologic Strata

XIA Yi-min1,2, KE Jie1,2, QI Meng-xue3, DENG Chao-hui4   

  1. 1. State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China; 2. College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China; 3. China Railway 18 Bureau Group Tunnel Engineering Co., Ltd., Chongqing 400700, China; 4. China Railway Siyuan Survey and Design Group Co., Ltd., Wuhan 430063, China.
  • Received:2020-03-30 Revised:2020-03-30 Accepted:2020-03-30 Published:2021-03-12
  • Contact: XIA Yi-min
  • About author:-
  • Supported by:
    -

摘要: 为了研究TBM掘进参数与不同岩性地层的相关性规律,以新疆某引水工程为背景,针对典型岩性地层选取了300 m掘进参数数据,采用数理统计方法分析3项掘进参数与6种岩性地层的相关性. 通过分析6种岩性地层下刀盘转速、总推力与推进速度之间相关性,提出6种岩性地层下的掘进建议. 结果表明:各种岩性地层中推进速度、总推力的平均值差距较大,且有较大波动;刀盘转速波动不大,平均值差异较小;硅质岩、安山岩和凝灰岩地层下,总推力、刀盘转速和推进速度不相关;糜棱岩和砂岩地层下,总推力、刀盘转速和推进速度正相关;碎裂岩地层下总推力与推进速度负相关.

关键词: TBM;掘进参数;岩性;数理统计;相关性分析

Abstract: In order to study the correlation between TBM operating parameters and different lithologic strata, taking a Xinjiang water diversion project as the background, 300 m of tunneling parameter data was selected for typical lithologic strata. The correlation between 3 tunneling parameters and 6 lithologic strata was analyzed by using mathematical statistics. By analyzing the correlation among propulsion speed, total thrust and cutter speed under the six types of lithologic strata, the tunneling suggestions were put forward. The results show that the average value of propulsion speed and total thrust varies greatly among different lithologic strata. The cutter speed fluctuates little, and the average difference is small. In siliceous, andesite and tuff strata, the total thrust, cutter speed and propulsion speed are not correlated. In mylonite and sandstone strata, the total thrust, cutter speed and propulsion speed are positively correlated. In cataclastic rock strata, the total thrust is negatively correlated with the propulsion speed.

Key words: TBM(tunnel boring machine); operating parameters; lithology; mathematical statistics; correlation analysis

中图分类号: