转向节疲劳寿命评价及其局部裂纹尺寸的概率分布

doi:10.12068/j.issn.1005-3026.2022.06.015

东北大学学报（自然科学版） ›› 2022, Vol. 43 ›› Issue (6): 864-871.DOI: 10.12068/j.issn.1005-3026.2022.06.015

转向节疲劳寿命评价及其局部裂纹尺寸的概率分布

周逸夫^1,2，李鹤^1,2

(1. 东北大学机械工程与自动化学院，辽宁沈阳110819; 2. 东北大学航空动力装备振动及控制教育部重点实验室，辽宁沈阳110819)

修回日期:2021-08-10 接受日期:2021-08-10 发布日期:2022-07-01
通讯作者: 周逸夫
作者简介:周逸夫(1995-)，男，辽宁沈阳人，东北大学博士研究生；李鹤(1975-)，男，河南方城人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51675091).

Fatigue Life Assessment of a Vehicle Steering Knuckle and Probability Distribution of Its Local Crack Size

ZHOU Yi-fu^1,2， LI He^1,2

1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China; 2. Key Laboratory of Vibration and Control of Aero-Propulsion System， Ministry of Education， Northeastern University， Shenyang 110819， China.

Revised:2021-08-10 Accepted:2021-08-10 Published:2022-07-01
Contact: LI He
About author:-
Supported by:
-

摘要/Abstract

摘要： 转向节的作用是传递和承受汽车的前部载荷，支承和驱动前轮绕主销转动，使汽车转向.针对仍处于开发阶段的某麦弗逊式转向节的疲劳失效问题，提出了一种对其台架试验结果进行评估的方法，根据转向节在系统中的实际连接情况分多工况进行了疲劳台架试验，利用Weibull分布理论结合N_○50%， N_○90%标准对转向节的失效循环次数分布进行了评价，同时推导了一种局部疲劳裂纹尺寸的概率分布预测模型，并利用实测试验数据验证了所推导预测模型的适用性.

关键词: 转向节;前悬系统;疲劳试验;Weibull分布;裂纹尺寸分布

Abstract: The steering knuckle is used to transfer and bear the front load of the vehicle， support and drive the front wheel to rotate around the kingpin to make the automotive turn. Aimed at the fatigue failure of a McPherson-type steering knuckle which is still at the development stage， a method is proposed to evaluate the rig test results based on its actual connection situation in the system， and the fatigue rig test is carried out under multiple working conditions. The failure cycle number distribution of the steering knuckle is evaluated by using Weibull distribution theory and N_50% and N_90% criteria. At the same time， a probability distribution prediction model of local fatigue crack size is derived， and the applicability of the proposed prediction model is verified by the experimental data.

Key words: steering knuckle; front suspension system; fatigue test; Weibull distribution; crack size distribution

中图分类号:

U461.7

周逸夫，李鹤. 转向节疲劳寿命评价及其局部裂纹尺寸的概率分布[J]. 东北大学学报（自然科学版）, 2022, 43(6): 864-871.

ZHOU Yi-fu， LI He. Fatigue Life Assessment of a Vehicle Steering Knuckle and Probability Distribution of Its Local Crack Size[J]. Journal of Northeastern University(Natural Science), 2022, 43(6): 864-871.

参考文献

[1]Chang Y S，Lee J.Reliability-based design optimization of knuckle component using conservative method of moving least squares meta-models［J］.Probabilistic Engineering Mechanics，2011，26(2):364-379.
[2]Chang J W，Lee Y S.Topology optimization of compressor bracket［J］.Journal of Mechanical Science& Technology，2008，22(9):1668-1676.
[3]Han Y，Lin Y，Zhang C，et al.Customer-related durability test of semi-trailer engine based on failure mode［J］.Engineering Failure Analysis，2021，120:105095.
[4]Meyer J J，Adams D E.Theoretical and experimental evidence for using impact modulation to assess bolted joints［J］.Nonlinear Dynamic，2015，81(1/2):103-117.
[5]Esmaeili F，Chakherlou T N，Zehsaz M.Prediction of fatigue life in aircraft double lap bolted joints using several multiaxial fatigue criteria［J］.Materials & Design，2014，59(7):430-438.
[6]Cordeiro G M，Gomes A E，Da-Sliva C Q，et al.The beta exponentiated Weibull distribution［J］.Journal of Statistical Computation & Simulation，2013，83(1):114-138.
[7]Caiza P，Ummenhofer T.General probability weighted moments for the three-parameter Weibull distribution and their application in S-N curves modelling［J］.International Journal of Fatigue，2011，33(12):1533-1538.
[8]顾怡，姚卫星.疲劳裂纹尺寸的随机分布［J］.机械强度，1992，14(1):30-32.(Gu Yi，Yao Wei-xing.Random distribution of fatigue crack size［J］.Mechanical Strength，1992，14(1):30-32.)
[9]Khalili H，Oterkus S，Barltrop N，et al.Different Bayesian methods for updating the fatigue crack size distribution in a tubular joint［J］.Journal of Offshore Mechanics and Arctic Engineering，2020，143(2):1-28.
[10]Co N，Burns J T.Effects of micro-scale corrosion damage feature and local microstructure on fatigue crack initiation location［J］.International Journal of Fatigue，2021，150(4):106301.
[11]Solomos G P，Lucia A C.Markov approximation to fatigue crack size distribution［J］.Fatigue & Fracture of Engineering Materials & Structures，1990，13(5):457-471.
[12]Wang H，Liu X，Wang X，et al.Numerical method for estimating fatigue crack initiation size using elastic-plastic fracture mechanics method［J］.Applied Mathematical Modelling，2019，73(9):365-377.
[13]Almalki S J，Nadarajah S.Modification of the Weibull distribution:a review［J］.Reliability Engineering & System Safety，2014，124:32-55.
[14]Liu C T.Critical analysis of crack growth data［J］.Journal of Propulsion & Power，1990，6(5):519-524.

转向节疲劳寿命评价及其局部裂纹尺寸的概率分布

Fatigue Life Assessment of a Vehicle Steering Knuckle and Probability Distribution of Its Local Crack Size

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价