单激励三维超声车削加工技术的实验研究

doi:10.12068/j.issn.1005-3026.2023.08.012

东北大学学报（自然科学版） ›› 2023, Vol. 44 ›› Issue (8): 1152-1159.DOI: 10.12068/j.issn.1005-3026.2023.08.012

单激励三维超声车削加工技术的实验研究

张家豪，邹平，魏事宇，梁付强

(东北大学机械工程与自动化学院，辽宁沈阳110819)

发布日期:2023-08-15
通讯作者: 张家豪
作者简介:张家豪(1996-)，男，山东日照人，东北大学硕士研究生; 邹平(1963-)，男，辽宁沈阳人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51875097).

Experimental Study on Single-Excitation 3-D Ultrasonic Turning Technology

ZHANG Jia-hao， ZOU Ping， WEI Shi-yu， LIANG Fu-qiang

School of Mechanical Engineering & Automation，Northeastern University， Shenyang 110819， China.

Published:2023-08-15
Contact: ZOU Ping
About author:-
Supported by:
-

摘要/Abstract

摘要： 应用单激励三维超声辅助振动装置对三维超声车削技术的表面加工机理进行研究.首先通过建立刀尖的运动轨迹方程，设计了适用于三维超声切削的仿真模型，并设计了仿真正交实验，利用多重比较方差分析研究了三维超声车削过程中主轴转速、切削深度和进给量对表面形貌的影响.随后通过实验对比了三维超声车削与普通车削的表面加工质量，并就加工参数对三维超声车削的影响规律以及最优参数进行了研究.结果表明:相对于普通车削，三维超声车削可以得到更好的表面加工质量；进给量对表面粗糙度的影响最为显著；最优加工参数为主轴转速200r/min，切削深度0.12mm，进给量0.18mm/r.

关键词: 单激励三维超声；参数优化；表面粗糙度；表面形貌仿真；方差分析

Abstract: The surface machining mechanism of 3-D ultrasonic turning technology is studied by using the single-excitation 3-D ultrasonic assisted vibration device. Firstly， the simulation model suitable for 3-D ultrasonic cutting is designed by establishing the trajectory equation of the tool tip， and the simulation orthogonal experiment is designed. The influence of spindle speed， cutting depth and feed rate on surface morphology in 3-D ultrasonic turning process is studied by the multiple comparative analyses of variance. Then， the surface processing quality of 3-D ultrasonic turning and ordinary turning is compared through experiments， and the influence of processing parameters on 3-D ultrasonic turning and the optimal parameters are studied. The results show that compared with ordinary turning， 3-D ultrasonic turning can obtain better surface processing quality， and the influence of feed rate on surface roughness is the most significant. The optimal processing parameters are spindle speed 200r/min， cutting depth 0.12mm， and feed rate 0.18mm/r.

Key words: single-excitation 3-D ultrasonic; parameter optimization; surface roughness; surface morphology simulation; variance analysis

中图分类号:

TG506.5

张家豪，邹平，魏事宇，梁付强. 单激励三维超声车削加工技术的实验研究[J]. 东北大学学报（自然科学版）, 2023, 44(8): 1152-1159.

ZHANG Jia-hao， ZOU Ping， WEI Shi-yu， LIANG Fu-qiang. Experimental Study on Single-Excitation 3-D Ultrasonic Turning Technology[J]. Journal of Northeastern University(Natural Science), 2023, 44(8): 1152-1159.

参考文献

[1]Cm A，Es B，Tm C，et al.Suppression of burrs in turning with ultrasonic elliptical vibration cutting［J］.International Journal of Machine Tools and Manufacture，2005，45(11):1295-1300.
[2]Kurniawan R.Surface topography analysis in three-dimensional elliptical vibration texturing (3D-EVT)［J］.International Journal of Advanced Manufacturing Technology，2019，102(58):1601-1621.
[3]Hsu C Y，Huang C K，Wu C Y.Milling of MAR-M247 nickel-based superalloy with high temperature and ultrasonic aiding［J］.International Journal of Advanced Manufacturing Technology，2007，34(9):857-866.
[4]舒荣福.非圆形截面钢丝圆柱螺旋压缩弹簧设计计算方法的探讨［J］.机械工业标准化与质量，2008(10):21-25.(Shu Rong-fu.The discussion of design calculate method for cylindrical helical compression spring with non-circular cross section wire［J］.Standardization and Quality in the Mechanical Industry，2008(10):21-25.)
[5]朱炎，朱琪，毛乐勇.矩形截面螺旋压缩弹簧的EXCEL设计及其应用［J］.机械工业标准化与质量，2012，1(1):107-114.(Zhu Yan，Zhu Qi，Mao Le-yong.EXCEL design and application of rectangular section spiral compression spring［J］.Standardization and Quality in the Mechanical Industry，2012，1(1):107-114.)
[6]尹自强.超精密直线度测量及表面微观形貌分析研究［D］.长沙:国防科学技术大学，2003.(Yin Zi-qiang.Research on ultra-precision measuring straightness and surface microtopography analysis［D］.Changsha:National University of Defense Technology，2003.)
[7]Ma C X.Analysis of regenerative chatter suppression with adding the ultrasonic elliptical vibration on the cutting tool［J］.Precision Engineering，2011，35(2):329-338.
[8]Sanda A，Arriola I，Garcia N V，et al.Ultrasonically assisted drilling of carbon fibre reinforced plastics and Ti6Al4V［J］.Journal of Manufacturing Processes，2016，22:169-176．
[9]Babitsky V I，Kalashnikov A N，Meadows A，et al.Ultrasonically assisted turning of aviation materials［J］.Journal of Materials Processing Technology，2003，36:157-167.
[10]Klimczak M，Kern P，Heinzelmann T，et al.High-throughput study of the effects of inorganic additives and poisons on NH₃-SCR catalysts—part I:V₂O₅-WO₃/TiO₂ catalysts［J］.Applied Catalysis B:Environmental，2010，95(1/2):39-47.

单激励三维超声车削加工技术的实验研究

Experimental Study on Single-Excitation 3-D Ultrasonic Turning Technology

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	田英健，邹平，陈硕，温泉. 轴向超声振动辅助钻削机理与试验研究[J]. 东北大学学报:自然科学版, 2019, 40(5): 705-709.
[2]	陈硕，邹平，田英健，毛亮. 高温合金轴向超声振动钻削减摩机理[J]. 东北大学学报:自然科学版, 2018, 39(10): 1485-1489.
[3]	徐英帅，邹平，王伟，杨旭磊. 超声振动辅助车削高温合金和铝镁合金研究[J]. 东北大学学报:自然科学版, 2017, 38(1): 95-100.
[4]	方锐，邹平，段经伟，张硕. 微织构刀具三维超声振动车削304不锈钢研究[J]. 东北大学学报（自然科学版）, 2022, 43(12): 1761-1768.
[5]	方锐，邹平，段经伟，魏事宇. 三维超声振动辅助车削减摩特性与表面质量的实验研究[J]. 东北大学学报（自然科学版）, 2023, 44(2): 233-241.