任务-结构-迭代融合的挖掘机操作界面设计方法

doi:10.12068/j.issn.1005-3026.2021.02.017

东北大学学报（自然科学版） ›› 2021, Vol. 42 ›› Issue (2): 267-275.DOI: 10.12068/j.issn.1005-3026.2021.02.017

任务-结构-迭代融合的挖掘机操作界面设计方法

任家骏¹，王雅坤¹，李娟莉¹，李爱峰²

(1. 太原理工大学机械与运载工程学院，山西太原030024; 2. 太原重工股份有限公司技术中心，山西太原030024)

收稿日期:2020-06-19 修回日期:2020-06-19 接受日期:2020-06-19 发布日期:2021-03-05
通讯作者: 任家骏
作者简介:任家骏(1958-)，男，山西孝义人，太原理工大学教授，博士生导师.
基金资助:
国家高技术研究发展计划项目(2012AA062001)；山西省研究生教改项目(2019JG047)；山西省研究生教育创新项目(2020SY556).

Design Method of Excavator Operation Interface Based on Task-Structure-Iteration Fusion

REN Jia-jun¹， WANG Ya-kun¹， LI Juan-li¹， LI Ai-feng²

1. College of Mechanical and Vehicle Engineering， Taiyuan University of Technology， Taiyuan 030024， China; 2. Technology Center， Taiyuan Heavy Machinery Group Co.， Ltd.， Taiyuan 030024， China.

Received:2020-06-19 Revised:2020-06-19 Accepted:2020-06-19 Published:2021-03-05
Contact: WANG Ya-kun
About author:-
Supported by:
-

摘要/Abstract

摘要： 为改善矿用挖掘机操作员的作业体验和操作界面设计不合理现状，提出了一种任务-结构-迭代融合的挖掘机操作界面设计方法.采用问卷调查、实地考察和文献资料分析等方法掌握操作员在作业中对环境和信息的感知接收情况，分析操作界面存在的问题，得出所需的设计点.采用结构分解法分析原操作界面的布局，建立了各模块与设计点之间的映射关系，分别确立控制台、控制面板、控制元件等主要模块的设计方法，并引入遮光设计和防误操作设计;采用人机工程学软件Jack迭代评价矿用挖掘机操作界面的可视性、可达性和舒适性.结果表明，应用任务-结构-迭代融合法设计的操作界面更加合理.

关键词: 矿用挖掘机;操作界面;任务分析;结构分解;迭代设计

Abstract: A task-structure-iteration fusion design method is proposed to improve the experience of operator manipulating mining excavator and the operation interface design. Questionnaire， field investigation and literature analysis are carried out to investigate the operator perceptive status to environment and information in the task and to find out the shortcomings of the existing operation interface， and the design points aiming at the defects are obtained. The mapping between modules and the design points is established by dividing the layout of operation interface into several modules with a structure split method. The arrangement methods of the console， control panel and control components are developed， with shading and anti-misoperation considered. The engineering software Jack is used to iteratively evaluate the visibility， accessibility and comfortability of mining excavator operation interface. The results show that the rationality of the operation interface is improved by the task-structure-iteration fusion method.

Key words: mining excavator; operation interface; task analysis; structure split; iterative design

中图分类号:

TD422

任家骏，王雅坤，李娟莉，李爱峰. 任务-结构-迭代融合的挖掘机操作界面设计方法[J]. 东北大学学报（自然科学版）, 2021, 42(2): 267-275.

REN Jia-jun， WANG Ya-kun， LI Juan-li， LI Ai-feng. Design Method of Excavator Operation Interface Based on Task-Structure-Iteration Fusion[J]. Journal of Northeastern University(Natural Science), 2021, 42(2): 267-275.

参考文献

[1]毛亮，薛月菊，林焕凯，等.一种基于视频图像的挖掘机工作状态识别方法［J］.系统工程理论与实践，2019，39(3):797-804.(Mao Liang，Xue Yue-ju，Lin Huan-kai，et al.A recognition method of working state of excavator based on video image［J］.System Engineering—Theory & Practice，2019，39(3):797-804.)
[2]Malafeev S I，Novgorodov A A.Design and implementation of electric drives and control systems for mining excavators［J］.Russian Electrical Engineering，2016，87(10):560-565.
[3]Jin X Q，Zhang J Y，Liu Y H.The ergonomics research of the joystick in excavator cab［J］.Applied Mechanics & Materials，2014，494/495:128-131.
[4]Azadeh A，Moradi B.Simulation optimization of facility layout design problem with safety and ergonomics factors［J］.International Journal of Industrial Engineering—Theory Applications and Practice，2014，21(4):209-230.
[5]Jamil N，Chen X M，Cloninger A.Hildreth’s algorithm with applications to soft constraints for user interface layout［J］.Journal of Computational and Applied Mathematics，2015，288:193-202.
[6]庞晓柯，周以齐，唐伟，等.基于工况传递路径分析的挖掘机座椅振动研究［J］.振动与冲击，2015，34(9):171-176.(Pang Xiao-ke，Zhou Yi-qi，Tang Wei，et al.Excavator seat vibration investigation based on operational transfer path analysis［J］.Journal of Vibration and Shock，2015，34(9):171-176.)
[7]李林峰，向啸晗.数字化主控室操纵员操作模式及响应时间研究［J］.核动力工程，2019，40(1):87-90.(Li Lin-feng，Xiang Xiao-han.Research of operating behavior and response time in digital control room of nuclear power plants［J］.Nuclear Power Engineering，2019，40(1):87-90.)
[8]张力，刘建桥，邹衍华，等.核电厂数字化主控室操纵员界面管理任务特征的研究［J］.核动力工程，2019，40(4):91-95.(Zhang Li，Liu Jian-qiao，Zou Yan-hua，et al. Characteristics of operator interface management tasks in digital main control room of nuclear power plant［J］.Nuclear Power Engineering，2019，40(4):91-95.)
[9]张力，刘雪阳，邹衍华，等.核电厂操纵员在操作任务持续快速变化下的认知行为特征［J］.原子能科学技术，2019，53(11):2241-2246.(Zhang Li，Liu Xue-yang，Zou Yan-hua，et al.Characteristics of operator’s cognitive behavior under continuous and rapid change of operation tasks in nuclear power plant［J］.Atomic Energy Science and Technology，2019，53(11):2241-2246.)
[10]程时伟，沈晓权，陆煜华，等.眼动跟踪实现的跨设备分布式注意力感知界面［J］.计算机辅助设计与图形学学报，2017，29(9):1713-1724.(Cheng Shi-wei，Shen Xiao-quan，Lu Yu-hua，et al.Distributed attentive user interface for cross-device interaction based on eye tracking［J］.Journal of Computer-Aided Design & Computer Graphics，2017，29(9):1713-1724.)
[11]李晶，郁舒兰，刘玮.基于眼动追踪的数控界面布局认知特性评价［J］.计算机辅助设计与图形学学报，2017，29(7):1334-1342.(Li Jing，Yu Shu-lan，Liu Wei.Cognitive characteristic evaluation of CNC interface layout based on eye-tracking［J］.Journal of Computer-Aided Design & Computer Graphics，2017，29 (7):1334-1342.)
[12]吴晓莉，薛澄岐，Gedeon T，等.数字化监控任务界面中信息特征的视觉搜索实验［J］.东南大学学报(自然科学版)，2018，48(5):807-814.(Wu Xiao-li，Xue Cheng-qi，Gedeon T，et al.Visual search on information features on digital task monitoring interface［J］.Journal of Southeast University (Natural Science Edition)， 2018，48(5):807-814.)
[13]Cao Y H，You J X，Shi Y J，et al.Evaluation of automobile manufacturing enterprise competitiveness from social responsibility perspective［J］.Social Science Electronic Publishing，2016，11(2):89-98.
[14]王铁，吕梦茹.质量功能展开与AHP在铁路货运中的应用［J］.计算机集成制造系统，2018，24(1):264-271.(Wang Tie，Lyu Meng-ru.Application of QFD and AHP in railway freight transportation［J］.Computer Integrated Manufacturing Systems，2018，24(1):264-271.)
[15]Nakatani M，Ohno T，Katagiri Y，et al.The layout for the user-friendly manual:case study on an Internet set-up manual［J］.Lecture Notes in Computer Science，2011，6770: 40-45.
[16]于东玖，吴晓莉.设计中易用性原则与情感的关系［J］.包装工程，2006(6):308-309.(Yu Dong-jiu，Wu Xiao-li.Relation between easy to use and emotion in design［J］.Packaging Engineering，2006(6):308-309.)
[17]器具开关第1部分通用要求:GB15092.1—2003［S］.北京:中国标准出版社，2013.(Switches for appliances，part 1，general requirements:GB15092.1—2003［S］.Beijing:China Standards Press，2013.)

任务-结构-迭代融合的挖掘机操作界面设计方法

Design Method of Excavator Operation Interface Based on Task-Structure-Iteration Fusion

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价