东北大学学报(自然科学版) ›› 2021, Vol. 42 ›› Issue (6): 871-878.DOI: 10.12068/j.issn.1005-3026.2021.06.017

• 资源与土木工程 • 上一篇    下一篇

地震作用下沉管隧道节段接头剪力键的力学性能

何聪1, 徐国元1, 张志刚2   

  1. (1. 华南理工大学 土木与交通学院, 广东 广州510641; 2. 中交公路规划设计院有限公司, 北京100088)
  • 修回日期:2020-06-16 接受日期:2020-06-16 发布日期:2021-06-23
  • 通讯作者: 何聪
  • 作者简介:何聪(1992-),男,江西赣州人,华南理工大学博士研究生; 徐国元(1964-),男,湖北武汉人,华南理工大学教授,博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51508200).

Mechanical Properties of Shear Keys of Segment Joints in Immersed Tunnels Under Seismic Loading

HE Cong1, XU Guo-yuan1, ZHANG Zhi-gang2   

  1. 1. School of Civil Engineering & Transportation, South China University of Technology, Guangzhou 510641, China; 2. CCCC Highway Consultants Co., Ltd., Beijing 100088, China.
  • Revised:2020-06-16 Accepted:2020-06-16 Published:2021-06-23
  • Contact: XU Guo-yuan
  • About author:-
  • Supported by:
    -

摘要: 基于有限元法结合黏弹性人工边界,将地震波输入转化为等效节点力,建立了基于波动理论的三维平面SV波入射方法.半空间算例证明了SV波入射方法及其数值实现的准确性,并在该地震波输入方法的基础上,考虑上覆海水对沉管隧道的静、动水压力,研究了港珠澳大桥沉管隧道节段接头剪力键的力学性能.研究结果表明:水平地震作用下也会产生竖向加速度,但竖向加速度值较小;地震作用下剪力键受力最大的是压应力,拉应力相对较小;剪力键拉应力主要集中在剪力键与沉管主体连接的部位,该处易产生拉伸裂缝,水平剪力键的破坏形式主要是拉伸破坏;接头剪力键的布设方向决定了剪力键根部的剪力分布,绝大部分剪力被布设方向和节段位移方向相一致的剪力键所承担.

关键词: 沉管隧道;力学特性;有限元;剪力键;地震波

Abstract: On the basis of finite element method combined with viscous-elastic artificial boundary, the seismic wave input was transformed into equivalent node force, and a three-dimensional plane SV wave input method based on wave theory was established. The accuracy of seismic wave input method and the valid of the numerical analysis were proved by the half-space example. Then the mechanical properties of the shear keys of the segment joint in Hong Kong-Zhuhai-Macao Bridge immersed tunnel considering the static and dynamic water effects of the upper sea water were studied based on the established seismic wave input method. The results show that the vertical acceleration is also generated by horizontal earthquake, but the value of the vertical acceleration is small. The compressive stress is the largest stress on the shear key under earthquake, while the tensile stress is relatively small. Because the tensile stress of shear key is mainly concentrated on the locations where the shear key is connected with the main body of the immersed tunnel, tensile cracks are prone to occur. The main failure mode of horizontal shear keys is tensile failure. The setting direction of the shear key in the joint determines the shear distribution at the root of the shear key, and most of the shear forces are resisted by the shear key in the same direction with the displacement.

Key words: immersed tunnel; mechanical properties; finite element; shear key; seismic wave

中图分类号: