急倾斜薄矿脉夹制作用下中深孔爆破模拟与参数优化

doi:10.12068/j.issn.1005-3026.2022.04.015

东北大学学报（自然科学版） ›› 2022, Vol. 43 ›› Issue (4): 567-574.DOI: 10.12068/j.issn.1005-3026.2022.04.015

急倾斜薄矿脉夹制作用下中深孔爆破模拟与参数优化

安龙^1,2，张家华¹，李元辉¹，韩琳¹

(1. 东北大学深部金属矿山安全开采教育部重点实验室，辽宁沈阳110819; 2. 山东黄金集团有限公司，山东济南250101)

修回日期:2021-06-02 接受日期:2021-06-02 发布日期:2022-05-18
通讯作者: 安龙
作者简介:安龙(1987-)，男，内蒙古呼伦贝尔人，东北大学副教授.
基金资助:
中央高校基本科研业务费专项资金资助项目(N2001001，N182608003).

Simulation and Parameters Optimization of Medium Deep Hole Blasting in Steeply Narrow Vein Mine Under Confinement

AN Long^1,2， ZHANG Jia-hua¹， LI Yuan-hui¹， HAN Lin¹

1. Key Laboratory of Ministry of Education for Safe Mining of Deep Metal Mines， Northeastern University， Shenyang 110819， China; 2. Shandong Gold Group Co.，Ltd.， Jinan 250101， China.

Revised:2021-06-02 Accepted:2021-06-02 Published:2022-05-18
Contact: AN Long
About author:-
Supported by:
-

摘要/Abstract

摘要： 以内蒙古某金矿急倾斜薄矿脉中深孔开采为工程背景，采用经验类比、数值计算和现场试验等手段开展研究.分析了不同爆破参数下薄矿脉中深孔爆破围岩裂纹演化规律，得到了爆破孔网参数与爆破超欠挖百分比、爆破裂纹密度及围岩质点振动速度等指标之间的关系.结果表明:当孔间距为1.2~ 1.4m时，爆破超欠挖面积趋于零;当抵抗线为0.8~1.0m时，爆破块度较均匀;最优中深孔爆破参数为抵抗线1.0m，孔间距1.2m.现场中深孔爆破试验验证了本文的研究结果.

关键词: 急倾斜薄矿脉;中深孔;抵抗线;孔间距;数值模拟

Abstract: Taking the medium deep hole mining in steeply narrow vein of a gold mine in Inner Mongolia as the engineering background， through empirical analogies， numerical simulation and field tests methods， the evolution law of cracks in narrow veins of deep hole blasting under different blasting parameters was analyzed， and the relationship between the blasting parameters and the over-under-excavation percentage of blasting， the density of blasting cracks and the vibration velocity of the surrounding rock particles is obtained. The results show that: when the hole spacing is 1.2~1.4m， the over-under-excavation blasting area tends to be zero. When the burdern is 0.8~1.0m， the blasting fragmentation is more uniform. A burden of 1.0m and a hole spacing of 1.2m can be taken as optimal parameters during deep hole blasting. The field blasting test also verifies the research results of this paper.

Key words: steeply narrow vein; medium deep hole; burden; hole spacing; numerical simulation

中图分类号:

TD851

安龙，张家华，李元辉，韩琳. 急倾斜薄矿脉夹制作用下中深孔爆破模拟与参数优化[J]. 东北大学学报（自然科学版）, 2022, 43(4): 567-574.

AN Long， ZHANG Jia-hua， LI Yuan-hui， HAN Lin. Simulation and Parameters Optimization of Medium Deep Hole Blasting in Steeply Narrow Vein Mine Under Confinement[J]. Journal of Northeastern University(Natural Science), 2022, 43(4): 567-574.

参考文献

[1]安龙，徐帅，李元辉，等.急倾斜薄矿脉深孔落矿工艺参数优化［J］.东北大学学报(自然科学版)，2013，34(2):288-292.(An Long，Xu Shuai，Li Yuan-hui，et al.Deep hole blasting parameters optimization for steeply inclined thin vein［J］.Journal of Northeastern University(Natural Science)，2013，34(2):288-292.)
[2]Dominy S C，Platten I M.Continuity risk in narrow reef gold deposits-implications for evaluation and exploitation［C］// Proceedings of the Narrow Vein Mining Conference.2008.https://www.ausimm.com/publications/conference-proceedings/narrow-vein-mining-conference-2008.
[3]An L，Suorineni F T，Xu S，et al.A feasibility study on confinement effect on blasting performance in narrow vein mining through numerical modeling［J］.International Journal of Rock Mechanics and Mining Sciences，2018，112:84-94.
[4]Zhang Z.Rock fracture and blasting:theory and applications ［M］.Oxford:B-H/Elsevier Science，2016.
[5]魏炯，朱万成，魏晨慧，等.导向孔对两爆破孔间成缝过程影响的数值模拟［J］.工程力学，2013，30(5):335-339.(Wei Jiong，Zhu Wan-cheng，Wei Chen-hui，et al.Numerical simulation on contribution of guide-hole to crack coalescence of two boreholes ［J］.Engineering Mechanics，2013，30(5):335-339.)
[6]崔铁军，马云东，王来贵.基于PFC3D的露天矿边坡爆破过程模拟及稳定性研究［J］.应用数学和力学，2014，35(7):759-765.(Cui Tie-jun，Ma Yun-dong，Wang Lai-gui.Blasting process simulation and stability study of an open mine slope based on PFC3D ［J］. Applied Mathematics and Mechanics，2014，35(7):759-765.)
[7]Ma G W，An X M.Numerical simulation of blasting induced rock fractures ［J］.International Journal of Rock Mechanics & Mining Sciences，2008，45(6):966-975.
[8]Trivino L F，Mohanty B.Assessment of crack initiation and propagation in rock from explosion-induced stress waves and gas expansion by cross-hole seismometry and FEM-DEM method ［J］.International Journal of Rock Mechanics & Mining Sciences，2015，77:287-299.
[9]Shim H J，Ryu D W，Chung S K，et al.Optimized blasting design for large-scale quarrying based on a 3D spatial distribution of rock factor ［J］.International Journal of Rock Mechanics and Mining Sciences，2009，46(2):326-332.
[10]Mortazavi A，Katsananis P D.Modeling burden size and strata dip effects on the surface blasting process ［J］.International Journal of Rock Mechanics and Mining Sciences，2001，38(4):481-498.
[11]Ning Y J，Yang J，Ma G W，et al.Modeling rock blasting considering explosion gas penetration using discontinuous deformation analysis ［J］.Rock Mechanics and Rock Engineering，2011(44):483-490.
[12]Ruest M，Cundall P A，Guest A，et al.Developments using the particle flow code to simulate rock fragmentation by condensed phase explosives［J］.Fragblast，2006，8:140-151.
[13]Fakhimi A，Lanari M.DEM-SPH simulation of rock blasting ［J］.Computers and Geotechnics，2014，55:158-164.
[14]Cho S H，Nakamura Y，Mohanty B，et al.Numerical study of fracture plane control in laboratory-scale blasting ［J］.Engineering Fracture Mechanics，2008，75:3966-3984.
[15]Potyondy D O，Cundall P A，Sarracino R S.Modeling of shock-and gas-driven fractures induced by a blast using bonded assemblies of spherical particles ［J］.Rock Fragmentation by Blasting，1996，4:55-62.
[16]Villaescusa E.Geotechnical design for sublevel open stoping ［M］.New York:CRC Press，2014.

急倾斜薄矿脉夹制作用下中深孔爆破模拟与参数优化

Simulation and Parameters Optimization of Medium Deep Hole Blasting in Steeply Narrow Vein Mine Under Confinement

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价