东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (6): 830-833.DOI: -

• 论著 • 上一篇    下一篇

几类典型轧辊横移变凸度辊型的比较与分析

郭忠峰;徐建忠;李长生;刘相华;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-06-15 发布日期:2013-06-22
  • 通讯作者: Guo, Z.-F.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50534020)

Comparative analysis of some typical roll shapes with roll gap variable through roll shifting

Guo, Zhong-Feng (1); Xu, Jian-Zhong (1); Li, Chang-Sheng (1); Liu, Xiang-Hua (1)   

  1. (1) State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-06-15 Published:2013-06-22
  • Contact: Guo, Z.-F.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

747

摘要： 以典型的轧辊横移变凸度辊型,如基本CVC辊型曲线、优化设计的CVC辊型曲线及SMARTCrown辊型曲线为研究对象,从辊型曲线设计、轧制过程中轧辊所受轴向力及无载辊缝凸度等方面进行比较分析.结果表明:当板宽位于800~1 600 mm区间时,采用优化设计得到的CVC辊型曲线会获得较小的轴向力;相对于CVC轧辊而言,SMART Crown无载辊缝在带钢两肋波浪敏感区要大一些,故在控制带钢的双边浪缺陷上具有一定的优越性.

关键词: 轧辊横移, 轧机, 辊型曲线, CVC, SMARTCrown

Abstract: Some typical roll shapes available to vary roll gap through roll shifting in rolling process were analyzed comparatively, such as basic CVC roll, optimal CVC roll and SMART Crown roll in view of the shape design, axial load acting on the roll and no-load roll gap. The results showed that when using the optimal CVC roll shape, the axial force is smaller if the strip width is in the range from 800 to 1600 mm. On the SMART Crown rolls, the no-load roll gap in both flank zones is bigger than CVC roll, which is sensitive to shape wave, so, the SMART Crown roll has superiority in controlling strip shape wave.

中图分类号: