东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (6): 834-837.DOI: -

• 论著 • 上一篇    下一篇

四辊轧机轧辊弹性变形的研究

赵旭亮;王淑君;徐建忠;张殿华;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;金杯教育中心;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳110004;辽宁沈阳110015;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-06-15 发布日期:2013-06-22
  • 通讯作者: Zhao, X.-L.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金重点资助项目(50534020)

Research on roll elastic deformation on a 4-h mill

Zhao, Xu-Liang (1); Wang, Shu-Jun (2); Xu, Jian-Zhong (1); Zhang, Dian-Hua (1)   

  1. (1) State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China; (2) Jinbei Education Centre, Shenyang 110015, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-06-15 Published:2013-06-22
  • Contact: Zhao, X.-L.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

1063

摘要： 介绍了轧辊弹性变形影响函数解析方法的基本理论与公式.采用Fortran语言编写了轧辊弹性变形解析软件.采用编写的解析软件对某1 700 mm热带轧机精轧机组进行模拟计算,计算结果表明:增大弯辊力将降低出口带钢凸度;弯辊力的变化对辊间压力分布、工作辊挠度及辊间压扁的影响较大,而对支撑辊挠度及工作辊与轧件间的压扁影响不大;辊间压力在支撑辊端部位置存在峰值.以上模拟计算结论均符合轧制理论及现场实际.

关键词: 弹性变形, 四辊轧机, 影响函数法, 热带轧机, 板带钢

Abstract: Theory and basic formula of roll elastic deformation on a 4-h mill were investigated with the influence function analysis introduced and the analysis of roll elastic deformation program made for the simulation of an 1700 mm hot strip mill (HSM) to calculate the roll deformation. The results showed that the increase in roll bending force will decrease the crown of strip at exit, and the change in roll bending force has great influence on the distribution of pressure acted on strip by backup roll and work rolls, work roll deflection and flattening effect due to backup and work rolls, while the influence on backup roll deflection and flattening effect due to strip and work roll is small. There is a peak value of pressure due to both rolls at both ends of the backup roll. All the results mentioned above are in agreement with the theory of rolling process and what happened in the site.

中图分类号: