东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2006, Vol. 27 ›› Issue (10): 1075-1078.DOI: -

• 论著 • 上一篇    下一篇

烧结机模糊控制规则设计及其仿真

郭立新;李浩;黄秋野;陈伟;   

  1. 东北大学信息科学与工程学院;东北大学信息科学与工程学院;东北大学信息科学与工程学院;东北大学信息科学与工程学院 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-23 修回日期:2013-06-23 出版日期:2006-10-15 发布日期:2013-06-23
  • 通讯作者: Guo, L.-X.
  • 作者简介:-
  • 基金资助:
    教育部留学回国人员科研启动基金资助项目.

Rule design of fuzzy control of sintering machine and its simulation

Guo, Li-Xin (1); Li, Hao (1); Huang, Qiu-Ye (1); Chen, Wei (1)   

  1. (1) School of Information Science and Engineering, Northeastern University, Shenyang 110004, China
  • Received:2013-06-23 Revised:2013-06-23 Online:2006-10-15 Published:2013-06-23
  • Contact: Guo, L.-X.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

709

摘要： 实际生产中烧结终点的控制是一个较为复杂的过程,往往受到多种因素的影响.针对烧结过程中烧结终点的判别问题,建立了烧结过程的模糊控制系统,提出了烧结终点赋值方法,对烧结终点的判别做出了更合理的设计,从而保证了系统对受控过程的实时控制.仿真结果表明控制系统表现出较快的实时行为,具有严格的响应时间,可以提高烧结矿的质量,降低烧结机的故障率.

关键词: 烧结机, 烧结终点, 模糊控制, 工况识别, 规则设计

Abstract: Actually the control of burning-through point is quite a complex process, which is often subjected to the influences exerted by many factors. To discriminate correctly the burning-through point in sintering process, a fuzzy control system of sintering process is modeled and a new value assignment method is proposed for the burning-through point to enable a more reasonable design for the discrimination of burning-through point in sintering process with a real-time control ensured. The results show the control system can provide a fast response, which is advantageous to improving the quality of sintered ore and decreasing the fault rate of sintering machine.

中图分类号: