感应加热CFRP温度控制算法

doi:10.12068/j.issn.1005-3026.2022.01.003

东北大学学报（自然科学版） ›› 2022, Vol. 43 ›› Issue (1): 17-24.DOI: 10.12068/j.issn.1005-3026.2022.01.003

感应加热CFRP温度控制算法

许家忠¹，赵辉¹，付天宇²，张成东¹

)(1. 哈尔滨理工大学自动化学院，哈尔滨150080; 2. 哈尔滨理工大学机械动力工程学院，哈尔滨150080)

修回日期:2021-04-25 接受日期:2021-04-25 发布日期:2022-01-25
通讯作者: 许家忠
作者简介:许家忠(1977-)，男，黑龙江哈尔滨人，哈尔滨理工大学教授，博士生导师.
基金资助:
国家自然科学基金重点资助项目(91948202)；黑龙江省应用技术研究与开发计划项目(GA20A401).

Temperature Control Algorithm of Induction Heating CFRP

XU Jia-zhong¹， ZHAO Hui¹， FU Tian-yu²， ZHANG Cheng-dong¹

1. School of Automation， Harbin University of Science and Technology， Harbin 150080， China; 2. School of Mechanical and Power Engineering， Harbin University of Science and Technology， Harbin 150080， China.

Revised:2021-04-25 Accepted:2021-04-25 Published:2022-01-25
Contact: XU Jia-zhong
About author:-
Supported by:
-

摘要/Abstract

摘要： 为了解决在电磁感应加热碳纤维增强复合材料(carbon fiber reinforced polymer，CFRP)过程中，因系统抗干扰性弱、响应速度慢导致的CFRP成型质量差的问题，提出了一种基于改进粒子群优化的模糊PID(improved particle swarm optimization fuzzy PID，IPF-PID)控制算法，利用IPF对PID三个参数进行寻优和自调整.该算法结合PSO和Fuzzy-PID算法的优点，在避免了陷入局部最优的同时，保证控制精度和最佳的寻优性能.结果表明，该算法在增强控制器的自适应能力和减小调整时间方面效果显著.比传统的PID算法具有更小超调和稳态误差，更适用电磁感应加热CFRP温度控制系统.

关键词: 感应加热;粒子群算法;模糊控制;碳纤维增强复合材料;辨识

Abstract: In order to solve the problem of poor molding quality of CFRP(carbon fiber reinforced polymer) caused by the system’s weak anti-interference， slow response speed during the induction heating of CFRP， a Fuzzy-PID algorithm based on improved particle swarm optimization (IPF-PID) was proposed. IPF was used to optimize and self-adjust the three parameters of PID. The algorithm combines the advantages of PSO and Fuzzy-PID algorithm， while avoiding falling into the local optimum， it ensures the control accuracy and the best optimization performance. The results show that the algorithm used to enhance the adaptive ability of the controller and reduce the adjustment time has a significant effect. Compared with the traditional PID algorithm， it has smaller overshoot and steady-state error， and it is more suitable for induction heating CFRP temperature control system.

Key words: induction heating; particle swarm algorithm; fuzzy control; CFRP(carbon fiber reinforced polymer); identify

中图分类号:

TP15

许家忠，赵辉，付天宇，张成东. 感应加热CFRP温度控制算法[J]. 东北大学学报（自然科学版）, 2022, 43(1): 17-24.

XU Jia-zhong， ZHAO Hui， FU Tian-yu， ZHANG Cheng-dong. Temperature Control Algorithm of Induction Heating CFRP[J]. Journal of Northeastern University(Natural Science), 2022, 43(1): 17-24.

参考文献

[1]Karatas M A，Gkkaya H.A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials［J］.Defence Technology，2018，14(4):318-326.
[2]Das T K，Ghosh P，Das N C.Preparation，development，outcomes，and application versatility of carbon fiber-based polymer composites:a review［J］.Advanced Composites and Hybrid Materials，2019，2(2):214-233.
[3]Schieler O，Beier U，Mitschang P.Control of the through thickness temperature distribution in carbon composite aerospace parts during induction welding［J］.Journal of Thermoplastic Composite Materials，2017，31(12):1587-1608.
[4]Frogner K，Cedell T，Andersson M.Induction heating using a 2-phase travelling wave setup［J］.International Journal of Applied Electromagnetics & Mechanics，2014，44(2):217-226.
[5]Lundstrm F，Frogner K，Andersson M.A numerical model to analyse the temperature distribution in cross-ply CFRP during induction heating［J］.Composites Part B:Engineering，2020，202:108419.
[6]Ravari A R N，Taghirad H D.A novel hybrid fuzzy-PID controller for tracking control of robot manipulators［C］//IEEE International Conference on Robotics and Biomimetics.Bangkok，Thailand，2009:1625-1630.
[7]Howell M N，Best M C.On-line PID tuning for engine idle-speed control using continuous action reinforcement learning automata［J］.Control Engineering Practice，2000，8(2):147-154.
[8]Meshram P M，Kanojiya R G.Tuning of PID controller using Ziegler-Nichols method for speed control of DC motor［C］// International Conference on Advances in Engineering，Science and Management (ICAESM).Nagapattinam:IEEE，2012:117-122.
[9]Duan H B，Wang D B，Yu X F.Novel approach to nonlinear PID parameter optimization using ant colony optimization algorithm［J］.Journal of Bionic Engineering，2006，3(2):73-78.
[10]Varol H A，Bingul Z.A new PID tuning technique using ant algorithm［C］// Proceedings of the 2004 American Control Conference.Boston，2004:2154-2159 .
[11]Boubertakh H，Tadjine M，Glorennec P Y.Tuning fuzzy PD and PI controllers using reinforcement learning［J］.ISA Transactions，2010，49(4):543-551.
[12]Aghaei V T，Onat A，Eksin I，et al.Fuzzy PID controller design using Q-learning algorithm with a manipulated reward function［C］// European Control Conference (ECC).Linz，Austria，2015:2502-2507.
[13]Wen X，Wang J.Fuzzy PID controller based on improved neural network for satellite attitude［C］//The Fifth International Conference on Instrumentation and Measurement，Computer，Communication and Control (IMCCC).Qinhuangdao，2015:1206-1211.
[14]Soyguder S，Alli H.Fuzzy adaptive control for the actuators position control and modeling of an expert system［J］.Expert Systems with Applications，2010，37(3):2072-2080.

感应加热CFRP温度控制算法

Temperature Control Algorithm of Induction Heating CFRP

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王海芳，张瑶，朱亚锟，陈晓波. 基于改进双向RRT^*的移动机器人路径规划算法[J]. 东北大学学报（自然科学版）, 2021, 42(8): 1065-1071.
[2]	王海芳，崔阳阳，李鸣飞，李广宇. 基于改进RRT*FN的移动机器人路径规划算法[J]. 东北大学学报（自然科学版）, 2022, 43(9): 1217-1225.