东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2006, Vol. 27 ›› Issue (2): 173-176.DOI: -

• 论著 • 上一篇    下一篇

中厚板轧制过程计算机控制系统结构的研制

何纯玉;吴迪;王君;王国栋;   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-23 修回日期:2013-06-23 出版日期:2006-02-15 发布日期:2013-06-23
  • 通讯作者: He, C.-Y.
  • 作者简介:-
  • 基金资助:
    国家“十五”重大装备研制项目(ZZ0113A040201)

Development of architecture of computer control system for plate rolling process

He, Chun-Yu (1); Wu, Di (1); Wang, Jun (1); Wang, Guo-Dong (1)   

  1. (1) State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-23 Revised:2013-06-23 Online:2006-02-15 Published:2013-06-23
  • Contact: He, C.-Y.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

797

摘要： 介绍了中厚板轧机过程控制系统的组成和功能,根据中厚板轧制过程的特点,详细分析了模块间数据的通讯方式.在现场应用的基础上,提出了系统软件的设计规划,建立了通讯与模型相分离的两层进程的软件体系结构,完全满足了过程控制系统运行的安全和稳定,简化了系统的调试和维护.软件体系结构采用了易于扩展的开放性设计,使其适用性更强,这种结构同样适用于冷却过程计算机系统的开发.

关键词: 中厚板轧机, 过程控制, 数据通讯, 多线程, 事件调度

Abstract: The architecture and functions of the control system we developed for plate rolling process were introduced according to the characteristics of the process. How the data communication is implemented among the modules used was analyzed in detail. Based on the application in site, a conceptual design was suggested for the system software to constitute a two-level software hierarchy of process control of which the communication is separated from the process model. Such a hierarchy meets all the safe and stable requirement for the operation of the process control system and simplifies the debugging procedure and maintenance for the system. Introducing the expandable open design into the software hierarchy, the adaptability of the control system becomes stronger. Such a hierarchy is adaptable to the development of cooling process control as well.

中图分类号: