东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2014, Vol. 35 ›› Issue (4): 555-558.DOI: 10.12068/j.issn.1005-3026.2014.04.023

• 机械工程 • 上一篇    下一篇

回流焊工艺参数在线控制及优化策略

郭瑜1，孙志礼1，潘尔顺2   

  1. (1 东北大学 机械工程与自动化学院， 辽宁 沈阳110819； 2 上海交通大学 机械与动力工程学院， 上海200240)
  • 收稿日期:2013-07-01 修回日期:2013-07-01 出版日期:2014-04-15 发布日期:2013-11-22
  • 通讯作者: 郭瑜
  • 作者简介:郭瑜(1985-)，女，辽宁沈阳人，东北大学博士研究生；孙志礼(1957-)，男，山东巨野人，东北大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(50875168)；教育部新世纪优秀人才支持计划项目(NCET-11-0328).

Online Control and Optimization Strategy of Technological Parameters of Reflow Soldering

GUO Yu1， SUN Zhili1， PAN Ershun2   

  1. 1. School of Mechanical Engineering ＆ Automation， Northeastern University， Shenyang 110819， China; 2. School of Mechanical Engineering， Shanghai Jiao Tong University， Shanghai 200240， China.
  • Received:2013-07-01 Revised:2013-07-01 Online:2014-04-15 Published:2013-11-22
  • Contact: GUO Yu
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

958

摘要： 针对回流焊自动生产过程中带速波动问题，提出基于改进的APC策略消除噪声影响的优化方案.在生产过程中对输出参数进行监测，当特征值超出规定值时，启动APC策略对初始设置参数进行调整，优化过程采用BPNN-GA技术实现.定义特征值的田口质量损失函数，以田口过程能力指数对优化效果进行评估.测试结果显示，相对于传统的APC策略，所建立的改进方案保证了过程稳定，降低了调整频率，提高了优化速度.

关键词: 回流焊, 自动过程控制, 参数优化, 质量损失函数, 过程能力指数

Abstract: To reduce the speed fluctuations in the reflow soldering process， an optimization scheme based on the improved automatic process control (APC) was proposed. The output characteristics were monitored during the production process. When the characteristic value exceeded the predetermined value， APC policy was started to adjust the initial setting parameters and BP neural networkgenetic algorithm technology was used to achieve the optimization process. The Taguchi mass loss function of the product was defined and the Taguchi process capability index was calculated for evaluation. The test results showed that， compared with traditional APC scheme， the improved scheme ensures the process stability， decreases the adjust frequency and improves the optimization speed.

Key words: reflow soldering, automatic process control, parameter optimization, mass loss function, process capacity index

中图分类号: