东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2007, Vol. 28 ›› Issue (11): 1620-1623.DOI: -

• 论著 • 上一篇    下一篇

机械零件动态可靠性模型及失效率研究

王正;谢里阳;李兵;   

  1. 东北大学机械工程与自动化学院;东北大学机械工程与自动化学院;东北大学机械工程与自动化学院 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2007-11-15 发布日期:2013-06-24
  • 通讯作者: Wang, Z.
  • 作者简介:-
  • 基金资助:
    国家高技术研究发展计划项目(2006AA04Z408);;

Time-dependent reliability model and failure rate study of mechanical components

Wang, Zheng (1); Xie, Li-Yang (1); Li, Bing (1)   

  1. (1) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2007-11-15 Published:2013-06-24
  • Contact: Wang, Z.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1019

摘要： 分析了传统可靠性模型的特点,指出传统的可靠性模型并不能很好地反映零件可靠度和失效率随载荷作用次数或时间变化的规律.采用泊松随机过程描述随机载荷的作用过程,综合运用应力-强度干涉模型、泊松随机过程以及概率微分方程建立了强度随时间退化时的零件动态可靠性模型.以强度退化服从指数规律为例,研究了零件可靠度和失效率随时间的变化规律.研究表明,零件的可靠度随时间逐渐降低;失效率曲线具有"浴盆"曲线的全部特征.

关键词: 可靠性模型, 动态可靠度, 随机载荷, 零件可靠度, 失效率

Abstract: The characteristics of the conventional reliability models are analyzed and it is found that they can't reflect well the relationship between the reliability and failure rate of components because it involves not only the time but also the frequency of random loading. The Poisson stochastic process is applied to describing the loading process to develop a time-dependent reliability model of components considering the strength deterioration with time passing, which is derived by the stress-strength interference model in combination with the probability differential equation. Taking the strength deterioration of components following the exponential rule as an example, how the reliability and the failure rate of components changes with time is studied. The result shows that the reliability of components decreases with time, and the failure rate curve of components presents all the features of the bathtub curve.

中图分类号: