东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2004, Vol. 25 ›› Issue (1): 78-81.DOI: -

• 论著 • 上一篇    下一篇

可重构模块化机器人模块及构形设计

李树军;张艳丽;赵明扬   

  1. 东北大学机械工程与自动化学院;沈阳航空工业学院;中国科学院沈阳自动化研究所 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2004-01-15 发布日期:2013-06-24
  • 通讯作者: Li, S.-J.
  • 作者简介:-
  • 基金资助:
    国家"十五"科技攻关项目(2001BA206A 2 5);;辽宁省自然科学基金资助项目(9910400204)·

Modules and configuration design of reconfigurable modular robots

Li, Shu-Jun (1); Zhang, Yan-Li (2); Zhao, Ming-Yang (3)   

  1. (1) Sch. of Mech. Eng. and Automat., Northeastern Univ., Shenyang 110004, China; (2) Shenyang Inst. of Aero. Eng., Shenyang 110034, China; (3) Shenyang Inst. of Automat., Chinese Acad. of Sci., Shenyang 110015, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2004-01-15 Published:2013-06-24
  • Contact: Li, S.-J.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

2081

摘要： 对可重构模块化机器人模块的结构进行了研究,并归纳设计出7种功能模块,其中包括3种1自由度的关节模块,2种连杆模块和2种辅助模块·所有模块的功能都是独立的,并且每个模块的连接界面都设计成了圆筒形以便重组和提高其刚度·每一种模块都可设计成不同尺寸系列,这些不同类型和尺寸系列的模块便可构成一个模块库·作者对3个自由度串联机器人的构形进行了系统的研究,并应用制作的实验模块对研究结果的可行性进行了验证·

关键词: 可重构, 模块化机器人, 模块设计, 构形综合, 串联机器人

Abstract: To meet the requirement of rapid reconfiguration of robot systems, the structure of modules of modular robots was studied. 7 kinds of modules were developed, including 3 as joints with 1 DOF, 2 as links, 1 as base and 1 as connecting module for different series of modules. The design of joint modules takes into account not only kinematic independence but also control independence. The connective parts of all modules were designed in cylindrical form for convenient reconfiguration and increasing rigidity. A modular base can thus be set up by the modules of which each has a series of dimensions. The configurations of 3 DOF series robot system were presented. The feasibility of these modules was verified.

中图分类号: