东北大学学报(自然科学版) ›› 2005, Vol. 26 ›› Issue (2): 152-155.DOI: -

• 论著 • 上一篇    下一篇

三种齿轮油复剂的极压抗磨性能对比研究

李庆忠;于秀坤;胡俊宏;丁津原   

  1. 东北大学机械工程与自动化学院;沈阳航空工业学院;东北大学机械工程与自动化学院;东北大学机械工程与自动化学院 辽宁沈阳 110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2005-02-15 发布日期:2013-06-24
  • 通讯作者: Li, Q.-Z.
  • 作者简介:-
  • 基金资助:
    辽宁省教育厅科学研究计划资助项目(202243215)

Comparative study on EP and AW performance of three kinds of gear oil additive compounds

Li, Qing-Zhong (1); Yu, Xiu-Kun (2); Hu, Jun-Hong (1); Ding, Jin-Yuan (1)   

  1. (1) Sch. of Mech. Eng. and Automat., Northeastern Univ., Shenyang 110004, China; (2) Shenyang Inst. of Aero. Eng., Shenyang 110034, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-02-15 Published:2013-06-24
  • Contact: Li, Q.-Z.
  • About author:-
  • Supported by:
    -

摘要: 在500SN基础油中分别加入不同质量分数的HL 343,Hitec 343和Mobil 252三种复剂,配制成不同的油样·考察了这些油样的极压抗磨性能,探讨了添加剂的作用机理,进行了油样的烘箱抗氧化试验·结果表明:国产的HL 343复剂最大无卡咬负荷和烧结负荷较高,低载长磨磨斑小,主要原因是由于复剂在摩擦中游离出的活性磷元素生成了抗剪切强度很低的薄膜,减少了摩擦磨损·HL 343复剂烘箱抗氧化性能较好,综合抗磨性能优于Hitec 343和Mobil 252,完全可以取代进口同类产品·

关键词: 复合添加剂, 极压抗磨性, 抗氧化性, 摩擦磨损

Abstract: The performance of EP (extreme pressure) and AW (anti-wear) of the gear oil 500 SN in which the three additive compounds HL-343, Hitec-343 and Mobil-252 have separately been added was investigated to explore the mechanisms of those additive compounds with an antioxidizing test done in drying oven for the gear oil specimen. The results indicated that HL-343 in 500 SN oil presents the highest pB and relatively high pB with little worn-out scar due to low load for long time, where pB is the max. anti-sticking load and pB the burn-off load. The main reason is discussed as that the active free phosphorous released from the compound HL-343 under friction will form a thin film with low shear strength to reduce frictional wear. The compound HL-343 has high antioxidizing performance in drying oven and comprehensive wearability which is superior to both Hitec-343 and Mobil-252. So, the domestic additive HL-343 can completely substitute for the similar imports.

中图分类号: