磨矿动力学参数对磨矿速度的影响

doi:-

东北大学学报(自然科学版) ›› 2013, Vol. 34 ›› Issue (5): 708-711.DOI: -

磨矿动力学参数对磨矿速度的影响

侯英¹，丁亚卓²，印万忠¹，姚金¹

(1.东北大学资源与土木工程学院，辽宁沈阳110819；2.成都利君实业股份有限公司，四川成都610045)

收稿日期:2012-11-08 修回日期:2012-11-08 出版日期:2013-05-15 发布日期:2013-07-09
通讯作者: 侯英
作者简介:侯英(1986-)，男，辽宁鞍山人，东北大学博士研究生；印万忠(1970-)，男，浙江临安人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51074037)；中央高校基本科研业务费专项资金资助项目(N110501002).

Influence of Grinding Kinetics Parameters on Grinding Speed

HOU Ying¹， DING Yazhuo²， YIN Wanzhong¹， YAO Jin¹

1. School of Resources ＆ Civil Engineering， Northeastern University， Shenyang 110819， China; 2. Chengdu Leejun Industrial Co.， Ltd.， Chengdu 610045， China.

Received:2012-11-08 Revised:2012-11-08 Online:2013-05-15 Published:2013-07-09
Contact: YIN Wanzhong
About author:-
Supported by:
-

摘要/Abstract

摘要： 对磨矿动力学方程中的参数m和k应用解析几何和偏导数的方法进行研究，分析了磨矿动力学参数与磨矿时间的关系及对磨矿速度的影响.结果表明:在磨矿初期，当te1/k时，磨矿动力学参数k对筛上累计产率R起主要的影响作用，k越大，磨矿速度越快；随着磨矿时间的增加，当te1/k时，磨矿动力学参数m对筛上累计产率R起主要的影响作用，m越大，磨矿速度越快；并根据前人的研究成果验证了上述结论，上述研究结果可以很完整地分析各种不同的磨矿条件及物料性质对磨矿速度的影响，具有理论指导作用.

关键词: 磨矿动力学参数, 磨矿时间, 磨矿动力学方程, 偏导数

Abstract: The parameters m and k in grinding kinetics equation were studied by using analytic geometry and partial derivativ method. The analyses include not only the relationship between the parameters and the grinding time， but also the effect on the grinding speed. It turned out that the parameter k mainly affects oversized cumulative productivity R when te1/k. The larger parameter k is，the faster grinding speed is. With the increase of the grinding time the parameter m mainly affects oversized cumulative productivity R when te1/k. The larger parameter m is， the faster grinding speed is. Moreover， the conclusion was verified according to previous studies. The above theoretical results can fully explain the grinding speed under the different grinding conditions and material properties.

Key words: parameters of grinding kinetics, grinding time, grinding kinetics equation, partial derivative

中图分类号:

TD9214

侯英，丁亚卓，印万忠，姚金. 磨矿动力学参数对磨矿速度的影响[J]. 东北大学学报(自然科学版), 2013, 34(5): 708-711.

HOU Ying， DING Yazhuo， YIN Wanzhong， YAO Jin. Influence of Grinding Kinetics Parameters on Grinding Speed[J]. Journal of Northeastern University, 2013, 34(5): 708-711.

参考文献

[1] 陈炳辰.磨矿原理［M］.1版.北京:冶金工业出版社，1989:318.(Chen Bingchen.Theory of grinding［M］.1st ed.Beijing:Metallurgical Industry Press，1989:318.)
[2] Erdemoglu M，Aydogan S，Gock E.Effects of intensive grinding on the dissolution of celestite in acidic chloride medium［J］.Minerals Engineering，2009，22:14/24.
[3] Schmidt J，Plata M，Troger S，et al.Production of polymer particles below 5 μm by wet grinding［J］.Powder Technology，2012，228:84/90.
[4] Yao Z Q，Gu W B，Li K M.Relationship between surface roughness and subsurface crack depth during grinding of optical glass BK7［J］.Journal of Materials Processing Technology，2012，212:969/976.
[5] Rodríguez B A，Juan M，Aguado M，et al.Transient state analysis by simulation in a closed grinding circuit［J］.Minerals Engineering，2011，24:473/475.
[6] Matijasic G，Kurajica S.Grinding kinetics of amorphous powder obtained by solgel process［J］.Powder Technology，2010，197:165/169.
[7] Ozkan A，Yekeler M，Calkaya M.Kinetics of fine wet grinding of zeolite in a steel ball mill in comparison to dry grinding［J］.International Journal of Mineral Processing，2009，90:67/73.
[8] Bazin C，Obiang P.Should the slurry density in a grinding mill be adjusted as a function of grinding media size?［J］.Minerals Engineering，2007，20:810/815.
[9] Fuerstenau D W，Phatak P B，Kapur P C，et al.Simulation of the grinding of coarse/fine (heterogeneous) systems in a ball mill［J］.International Journal of Mineral Processing，2011，99:32/38.
[10] 段希祥.碎矿与磨矿［M］.2版.北京:冶金工业出版社，2006:179/180.(Duan Xixiang.Crushing and grinding［M］.2nd ed.Beijing:Metallurgical Industry Press，2006:179/180.)

磨矿动力学参数对磨矿速度的影响

Influence of Grinding Kinetics Parameters on Grinding Speed

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价