东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2014, Vol. 35 ›› Issue (8): 1137-1140.DOI: 10.12068/j.issn.1005-3026.2014.08.017

• 材料与冶金 • 上一篇    下一篇

先进冷却系统供水管路及喷嘴集管出口流速均匀性研究

谢谦，胡啸，王昭东，王国栋   

  1. (东北大学 轧制技术及连轧自动化国家重点实验室， 辽宁 沈阳110819)
  • 收稿日期:2013-09-22 修回日期:2013-09-22 出版日期:2014-08-15 发布日期:2014-04-11
  • 通讯作者: 谢谦
  • 作者简介:谢谦(1986-)，男，山西临汾人，东北大学博士研究生；王昭东(1968-)，男，安徽怀宁人，东北大学教授，博士生导师；王国栋(1942-)，男，辽宁大连人，东北大学教授，博士生导师，中国工程院院士.
  • 基金资助:
    国家重点基础研究发展计划项目(2010CB630800).

Exit Velocity Uniformity of Water Supply Pipe and Nozzle Manifolds in Advanced Cooling System

XIE Qian， HU Xiao， WANG Zhaodong， WANG Guodong   

  1. State Key Laboratory of Rolling and Automation， Northeastern University， Shenyang 110819， China.
  • Received:2013-09-22 Revised:2013-09-22 Online:2014-08-15 Published:2014-04-11
  • Contact: XIE Qian
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

665

摘要： 根据现场实测数据对先进冷却系统(ADCOS)喷嘴集管及供水管路流场进行有限元计算，对流量分配管和喷嘴供水管在不同直径、不同入口流速条件下的流体状态进行了对比分析，得到了满足喷嘴集管需求的喷嘴供水管直径，为喷嘴集管的入口流态均匀性提供了保证，并研究了在此入口条件下具备多层阻尼结构的喷嘴集管的稳态流场状态，经过对喷嘴出口流速数据进行分析，可看出在设备能力区间，喷嘴集管出口流速具有良好的均匀性，标准差最大为02692，最小为00982.

关键词: 先进冷却系统, 流态, 供水管路, 喷嘴, 流速分布

Abstract: The flow field of the nozzle manifolds and water supply pipes in an advanced cooling system was analyzed by the finite element method according to field data. The flow states of nozzle manifolds were compared under the conditions of different diameters and different inlet flow velocities of distribution pipes， thus the optimal diameter of the distribution pipe was obtained to satisfy the demand of nozzle manifolds， which guarantees the uniform flow state of nozzle manifolds. In addition， the steady flow state of multilayer damping nozzle manifold was studied. Within the equipment capacity， the outlet flow velocities of nozzle manifolds were uniform， with the standard deviation ranging from 00982 to 02692.

Key words: advanced cooling system, flow state, water supply pipe, nozzle, flow velocity distribution

中图分类号: