东北大学学报(自然科学版) ›› 2012, Vol. 33 ›› Issue (6): 883-886.DOI: -

• 论著 • 上一篇    下一篇

基于蚁群算法的爆炸图自动生成方法

邢宇飞;王成恩;于嘉鹏;   

  1. 东北大学流程工业综合自动化国家重点实验室;东北大学机械工程与自动化学院;
  • 收稿日期:2013-06-19 修回日期:2013-06-19 发布日期:2013-04-04
  • 通讯作者: -
  • 作者简介:-
  • 基金资助:
    解放军总装备部武器装备预研基金资助项目(9140A1XXXXXXXLN0101);;

Method for generating automated exploded view based on ant colony algorithm

Xing, Yu-Fei (1); Wang, Cheng-En (1); Yu, Jia-Peng (1)   

  1. (1) State Key Laboratory of Synthetical Automation for Process Industries, Northeastern University, Shenyang 110819, China; (2) School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
  • Received:2013-06-19 Revised:2013-06-19 Published:2013-04-04
  • Contact: Xing, Y.-F.
  • About author:-
  • Supported by:
    -

摘要: 提出一种局部爆炸图自动生成方法,为降低计算复杂度,利用蚁群算法求解零件的爆炸顺序.给出了零件爆炸距离的计算方法及爆炸图的构建过程.通过利用拆卸矩阵保证爆炸图中零件布局及零件爆炸方向的几何可行性.利用连接矩阵计算零件爆炸的连续性.以爆炸方向改变次数、零件爆炸连续性、爆炸距离为原则,求解优化的爆炸图布局.最后,以减速器三维模型为例进行验证,并对比UG NX软件的爆炸图自动生成功能,验证提出方法的可行性和有效性.

关键词: 爆炸图, 蚁群算法, 拆卸矩阵, 爆炸距离, UGNX

Abstract: A method of automatic acquiring exploded view was proposed. The ant colony algorithm was utilized to reduce the complexity of calculation. The computing method of exploded distance and the construction process of exploded view were presented. The connection matrix was used to evaluate the continuity of exploded view. The exploded view was optimized concerning with the changing frequency of the exploded direction, continuity and distance. Finally, with comparison of the automatic exploded view generated from UG NX, a reducer 3D model was studied to prove the validity and feasibility of the method.

中图分类号: