东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (4): 493-497.DOI: 10.12068/j.issn.1005-3026.2015.04.009

• 材料与冶金 • 上一篇    下一篇

基于小润湿角下脉冲磁场的凝固形核模型

陈国军1 ， 张永杰1,2 ， 杨院生3 ， 赫冀成1   

  1. (1.东北大学 材料电磁过程教育部重点实验室， 辽宁 沈阳110819; 2.宝钢集团中央研究院 能源与环境研究所， 上海201900; 3.中国科学院 金属研究所， 辽宁 沈阳110016 )
  • 收稿日期:2014-04-23 修回日期:2014-04-23 出版日期:2015-04-15 发布日期:2014-11-07
  • 通讯作者: 陈国军
  • 作者简介:陈国军(1984-)，男，江西抚州人，东北大学博士研究生; 张永杰(1970-)，男，浙江台州人，东北大学教授，博士生导师； 赫冀成(1943-)，男，辽宁瓦房店人，东北大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51034012).

Solidification Nucleation Model Based on Small Wetting Angle Under Pulsed Magnetic Field

CHEN Guo-jun1， ZHANG Yong-jie2， YANG Yuan-sheng3， HE Ji-cheng1   

  1. 1. Key Laboratory of Electromagnetic Processing of Materials， Ministry of Education， Northeastern University， Shenyang 110819， China; 2. Institute of Energy and Environmental Research， Central Research Institute of Baosteel Group， Shanghai 201900， China; 3. Institute of Metal Research， Chinese Academy of Sciences， Shenyang 110016， China.
  • Received:2014-04-23 Revised:2014-04-23 Online:2015-04-15 Published:2014-11-07
  • Contact: CHEN Guo-jun
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

783

摘要： 基于Ma形核模型，理论分析了异质形核基底小润湿角下脉冲磁场金属凝固的异质形核过程，建立了凝固形核模型.考察脉冲磁场磁感应强度对金属凝固临界形核半径及临界形核过冷度的影响.结果表明:该模型中体系Gibbs自由能与异质形核基底形状系数无关.在低过冷度金属凝固条件下，当脉冲磁场磁压力功与金属熔体固液自由能差在同一数量级时，脉冲磁场可有效减小凝固形核的临界半径；在大过冷度(大于20℃)金属凝固条件下，脉冲磁场对金属凝固临界形核半径的影响可忽略.金属凝固异质形核基底粒径较大时，临界形核过冷度随脉冲磁场磁感应强度增大而有效减小.

关键词: 晶粒细化, 异质形核, 脉冲磁场, 小润湿角, 临界形核半径, 临界形核过冷度

Abstract: Heterogeneous nucleation of small wetting angle under pulsed magnetic field (PMF) was theoretically analyzed on the basis of the Ma nucleation model， with the solidification uncleation model established. The effects of magnetic induction intensity of PMF on the critical nucleation radius and critical undercooling were investigated. The results showed that Gibbs free energy of the model has nothing to do with shape coefficient of heterogeneous nucleation substrate. When the work done by magnetic pressure is the same order as solid-liquid free energy difference under low undercooling， the PMF can effectively reduce the critical uncleation radius， and the effect of the PMF on the critical uncleation radius can be ignored under high undercooling (>20℃). When the substrate size is larger， the undercooling of critical uncleation decreases with increasing magnetic induction intensity of the PMF.

Key words: grain refinement, heterogeneous nucleation, pulsed magnetic field(PMF)；small wetting angle；critical nucleation radius；critical nucleation undercooling

中图分类号: