东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (1): 123-127.DOI: 10.12068/j.issn.1005-3026.2016.01.026

• 资源与土木工程 • 上一篇    下一篇

人工冻结尾矿力学特性单轴压缩试验研究

魏作安1,2, 杨永浩1,2, 徐佳俊1,2, 陈宇龙3   

  1. (1. 重庆大学 煤矿灾害动力学与控制国家重点实验室, 重庆400030;2. 重庆大学 复杂煤气层瓦斯抽采国家地方联合工程实验室, 重庆400030; 3. 东京大学 土木工程系, 日本 东京113-8656)
  • 收稿日期:2014-05-08 修回日期:2014-05-08 出版日期:2016-01-15 发布日期:2016-01-08
  • 通讯作者: 魏作安
  • 作者简介:魏作安(1965-),男,江西安义人,重庆大学教授,博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(11372363); 江西省“赣鄱英才555工程”项目.

Experimental Study on the Mechanical Properties of Frozen Tailings by Uniaxial Compression Tests

WEI Zuo-an1,2 ,YANG Yong-hao1,2, XU Jia-jun1,2,CHEN Yu-long3   

  1. 1. State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing 400030,China; 2. State and Local Joint Engineering Laboratory of Methane Drainage in Complex Coal Gas Seam, Chongqing University, Chongqing 400030,China; 3. Department of Civil Engineering, University of Tokyo, Tokyo 113-8656, Japan.
  • Received:2014-05-08 Revised:2014-05-08 Online:2016-01-15 Published:2016-01-08
  • Contact: WEI Zuo-an
  • About author:-
  • Supported by:
    -

摘要: 尾矿的冻结会影响尾矿坝的稳定性.通过室内单轴压缩试验,研究了经人工冻结四类尾矿的力学特性及其4个影响因素.研究结果显示,冻结尾矿单轴压缩破坏形式有三种,即斜面剪切破坏、径向拉伸破坏和复合式破坏.冻结尾矿单轴压缩全应力-应变曲线可分4个阶段:初始应变软化阶段、线性应变硬化阶段、非线性应变硬化阶段和非线性应变软化阶段.在4个影响因素中,冻结尾矿的单轴抗压强度与平均粒径呈对数关系,与干密度呈指数关系,与含水率呈线性递增关系,与加载速率呈二次抛物线增长关系.而冻结尾矿的变形模量与平均粒径呈自然对数关系,与干密度亦呈指数函数关系,与含水率则呈二次抛物线关系,与加载速率呈指数函数增长关系.

关键词: 尾矿, 单轴压缩, 力学性质, 变形特征, 冻结尾矿

Abstract: The frozen of tailings can affect the stability of the tailing dam. The uniaxial compression tests were carried out to study the mechanical characteristics of artificial frozen tailing and its four influence factors. There are three types of failure modes for frozen tailing specimen, i.e. shear failure in oblique section, tensile failure in radial direction and composite failure mode. The stress-strain curve of the frozen tailings samples can be divided into four stages: the axial compressive tests as initial stain softening stage, linear strain hardening stage, nonlinear strain hardening stage and softening stage. In the four factors, the uniaxial compressive strength is logarithmically related to the average particle size, exponentially related to the dry density ,linearly related to the moisture and parabolically related to the loading rate. The deformation modulus of frozen tailings is logarithmically related to the average particle size, exponentially related to the dry density and loading rate, and parabolically related to the water content.

Key words: tailings, uniaxial compression, mechanical property, deformation characteristics, frozen tailings

中图分类号: