东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2005, Vol. 26 ›› Issue (8): 751-754.DOI: -

• 论著 • 上一篇    下一篇

中厚板轧机全自动轧钢控制功能的在线实现

矫志杰;何纯玉;牛文勇;刘相华   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁 沈阳 110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2005-08-15 发布日期:2013-06-24
  • 通讯作者: Jiao, Z.-J.
  • 作者简介:-
  • 基金资助:
    国家经贸委基金资助项目(ZZ0113A040201)．

On-line implementation of full automatic rolling control on plate mills in tandem

Jiao, Zhi-Jie (1); He, Chun-Yu (1); Niu, Wen-Yong (1); Liu, Xiang-Hua (1)   

  1. (1) State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2005-08-15 Published:2013-06-24
  • Contact: Jiao, Z.-J.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1003

摘要： 介绍了中厚板轧机生产线全自动轧钢功能的实现过程.对轧制过程的手动控制和全自动控制进行对比,总结全自动轧钢控制功能的实现要点.将全自动轧钢控制功能在两级计算机控制系统中进行合理分配,通过过程控制系统和基础自动化系统协调配合,实现轧制过程的水平方向辊道控制、垂直方向道次数设定控制以及轧制道次控制等全自动轧钢控制功能.现场成功实现全自动轧钢控制功能,提高了轧线的自动化水平.

关键词: 中厚板轧机, 全自动轧钢, 控制, 逻辑判断

Abstract: How to implement the on-line full automatic rolling control on plate mills in tandem was introduced. Comparing the manual control mode with full automatic control mode in plate rolling process, the key points to implement the full automatic rolling control were summarized. Then, the control function was allocated reasonably in a two-level control system. With the coordination provided between the process control system and basic automation system, the full automatic rolling control was therefore implemented successfully in site, including the control of horizontal roller bed, of setting the number of vertical passes and of each and every rolling pass. The implementation indicates that the level of automation is further raised for plate mills.

中图分类号: