东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (8): 1177-1181.DOI: 10.12068/j.issn.1005-3026.2016.08.023

• 资源与土木工程 • 上一篇    下一篇

不同结构参数下STS管幕构件力学性能的数值分析

贾鹏蛟1， 赵文1， 郝云超2， 韩健勇1   

  1. (1. 东北大学 资源与土木工程学院， 辽宁 沈阳110819； 2. 中铁七局集团有限公司勘测设计院， 河南 郑州450016)
  • 收稿日期:2015-07-24 修回日期:2015-07-24 出版日期:2016-08-15 发布日期:2016-08-12
  • 通讯作者: 贾鹏蛟
  • 作者简介:贾鹏蛟(1989-)，男，河南周口人，东北大学博士研究生； 赵文(1962-)，男，辽宁沈阳人，东北大学教授.
  • 基金资助:
    国家自然科学基金资助项目(51578116).

Numerical Analysis of the Mechanical Properties of Steel Tube Slab Component Under Different Structural Parameters

JIA Peng-jiao1， ZHAO Wen1， HAO Yun-chao2， HAN Jian-yong1   

  1. 1. School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China; 2. Engineering Survey & Design Company of China Railway Seventh Group Co.， Ltd.， Zhengzhou 450016，China.
  • Received:2015-07-24 Revised:2015-07-24 Online:2016-08-15 Published:2016-08-12
  • Contact: HAN Jian-yong
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

690

摘要： 以8榀STS(steel tube slab)管幕构件室内试验为依托，为充分研究STS管幕构件的力学性能，建立构件的有限元模型，分析钢管厚度、螺栓直径、配筋率、翼缘板间距等参数对STS管幕构件力学性能的影响.结果表明:钢管厚度的变化，对试件的极限承载力影响不大，但能够有效地提高试件横向刚度；翼缘板间距的变化，对试件的极限承载力和横向刚度影响较显著；螺栓直径、配筋率的变化，对试件的极限承载力和横向刚度影响均不明显.

关键词: 管幕构件, 力学性能, 数值分析, 钢管混凝土, 结构参数

Abstract: Based on the experimental results of 8 STS(steel tube slab) components， the finite element models were proposed to study the mechanical properties of STS components， and influence of steel thickness， bolt diameter， reinforcement ratio and flange distance on the mechanical properties of STS component was analyzed. The results indicate: steel thickness has a little influence on the flexural capacity of STS component， but it effectively improves lateral stiffness of STS component; flange distance has a notably influence on the flexural capacity and lateral stiffness of STS component; however， bolt diameter and reinforcement ratio have little influence on the flexural capacity and lateral stiffness of STS component.

Key words: steel tube slab(STS) component, mechanical properties, numerical analysis, concrete-filled steel tube, structural parameter

中图分类号: