基于双CCD相机的三轴试验三维成像测量技术

doi:10.12068/j.issn.1005-3026.2015.05.026

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (5): 728-732.DOI: 10.12068/j.issn.1005-3026.2015.05.026

基于双CCD相机的三轴试验三维成像测量技术

赵红华¹，于绅坤¹，常艳¹，郭长宝²

(1. 大连理工大学工业装备与结构分析国家重点实验室，辽宁大连116023；2. 中国地质科学院地质力学研究所，北京100081)

收稿日期:2013-11-15 修回日期:2013-11-15 出版日期:2015-05-15 发布日期:2014-11-07
通讯作者: 赵红华
作者简介:赵红华(1977-)，女，山东郓城人，大连理工大学讲师，博士.
基金资助:
国家自然科学基金资助项目(51308091); 中央高校基本科研业务费专项资金资助项目(DZLXJK201206).

3D Image Measurement of Triaxial Testing Using Two CCD Cameras

ZHAO Hong-hua¹， YU Shen-kun¹， CHANG Yan¹， GUO Chang-bao²

1. Sate Key Laboratory Analysis for Industrial Equipment， Dalian University of Technology， Dalian 116023， China; 2. Institute of Geomechanics，Chinese Academy of Geological Sciences，Beijing 100081，China.

Received:2013-11-15 Revised:2013-11-15 Online:2015-05-15 Published:2014-11-07
Contact: GUO Chang-bao
About author:-
Supported by:
-

摘要/Abstract

摘要： 提出了一种基于双CCD相机的三轴试验三维成像测量技术，在三轴试验仪前后面分别放置一台CCD相机，利用具有黑白方格的橡皮膜代替传统的橡皮膜. 在试验过程中对试样进行图像采集，能够捕捉试样全表面的变形.提取和跟踪图像中黑白方格的角点并对试样的边界进行识别，基于三轴试样的水平截面在变形前后均保持水平圆形平面的假设，对前后表面分别采集到的图像进行拼接处理，初步实现了三轴试验过程中试样变形的三维测量，与有限元软件ANSYS相结合，能够绘制试样表面的三维变形云图，并将这种技术应用到了硅藻土的三轴试验研究中，取得了较好的测量效果.

关键词: 三轴试验, 数字图像, 三维测量, 角点提取, 边界识别, 双CCD相机

Abstract: A three-dimensional digital image measurement technique by using two CCD cameras placed at the front and back of the triaxial testing machine， respectively， was proposed. A plastic membrane with white and black grids was used to replace the traditional plastic membrane. The images of the specimen obtained during the triaxial testing were able to capture the deformation of the whole specimen surface. By extracting and tracking the corner points of white and black grids， and detecting the edge of the specimen， the front and back images were stitched together and three-dimensional deformation measurement of the soil specimen was realized based on the assumption that the horizontal cross section of the soil specimen will keep horizontal circular plane before and after deformation. By combining with the numerical analysis with ANSYS finite element software， 3D surface strain contour can be obtained. This technique was applied to triaxial testing of diatomite and it achieved very good measurement effects.

Key words: triaxial test, digital image, three dimensional measurement, corner point extraction, edge detection, two CCD camera

中图分类号:

TU411

赵红华，于绅坤，常艳，郭长宝. 基于双CCD相机的三轴试验三维成像测量技术[J]. 东北大学学报:自然科学版, 2015, 36(5): 728-732.

ZHAO Hong-hua， YU Shen-kun， CHANG Yan， GUO Chang-bao. 3D Image Measurement of Triaxial Testing Using Two CCD Cameras[J]. Journal of Northeastern University Natural Science, 2015, 36(5): 728-732.

参考文献

[1]Singh R，Chapman D P，Atkinson K B.Machine vision for dimensional measurements in mines［J］.Geotechnical and Geological Engineering，1997，15:185-203.
[2]Yuan B X，Liu J Y，Chen W W，et al.Development of a robust stereo-PIV system for 3-D soil deformation measurement［J］. Journal of Testing and Evaluation，2012，40(2):256-264.
[3]Uchida S，Levenberg E，Klar A.On-specimen strain measurement with fiber optic distributed sensing［J］.Measurement， 2015，60:104-113.
[4]Peth S，Nellesen J，Fischer G，et al.Non-invasive 3D analysis of local soil deformation under mechanical and hydraulic stresses by μCT and digital image correlation［J］.Soil & Tillage Research，2010，111:3-18.
[5]Bhandari A R，Powrie W，Harkness R M.A digital image-based deformation measurement system for triaxial tests［J］.Geotechnical Testing Journal，2012，35(2):1-6.
[6]邵龙潭，刘潇，郭晓霞，等，土工三轴试验试样全表面变形测量的实现［J］.岩土工程学报，2012，34(3):409-415.(Shao Long-tan，Liu Xiao，Guo Xiao-xia，et al.Whole surface deformation measurement of triaxial soil specimen based on digital image processing［J］.Chinese Journal of Geotechnical Engineering，2012，34(3):409-415.)
[7]Harris C，Stephens M.A combined corner and edge detector［C］∥Alvey Vision Conference of Plessey Research Roke Manor.London，1988:147-151.
[8]Shirivakshan G T，Chandrasekar C.A comparison of various edge detection techniques used in image processing［J］.International Journal of Computer Science Issues， 2012，9(5):269-276.
[9]邵龙潭.土力学研究与探索［M］.北京:科学出版社，2011.(Shao Long-tan.Research and exploration of soil mechanics［M］.Beijing:Science Press，2011.)(上接第727页)
[5]Nolde J E，Spears D.A preliminary assessment of in place coalbed methane resources in the Virginia portion of the central Appalachian Basin［J］. International Journal of Coal Geology，1998，38(1/2):115-136.
[6]Cai Y D，Liu D M，Yao Y B，et al.Geological controls on prediction of coal bed methane of No.3 coal seam in Southern Qinshui Basin，North China ［J］.International Journal of Coal Geology，2011，88(2/3):101-112.
[7]Yao Y B，Liu D M，Tang D Z，et al.Preliminary evaluation of the coal bed methane production potential and its geological controls in the Weibei coalfield，Southeastern Ordos Basin，China［J］. International Journal of Coal Geology，2009，78(1):1-15.
[8]李纪森，陈英.应用密度测井值计算煤层含气量［J］.测井专刊，1996(4):70-73.(Li Ji-sen，Chen Ying.To calculate the coal seam gas content use the density logging value ［J］.Logging，1996(4):70-73.)
[9]潘和平，黄智辉.煤层含气量测井解释方法探讨［J］.煤田地质与勘探，1998，26(2):58-60.(Pan He-ping，Huang Zhi-hui.Discussion on the log interpretation method of coalbed gas content ［J］.Coal Geology & Exploration，1998，26(2):58-60.)
[10]王盼盼，秦勇，高弟.观音山勘探区煤层含气量灰色关联预测［J］.煤田地质与勘探，2012，40(4):34-38.(Wang Pan-pan，Qin Yong，Gao Di.Grey relational prediction of coalbed methane content in Guanyinshan exploration district ［J］.Coal Geology & Exploration，2012，40(4):34-38.)
[11]赵丽娟，秦勇，林玉成.煤层含气量与埋深关系异常及其地质控制因素［J］.煤炭学报，2010，35(7):1165-1169.(Zhao Li-juan，Qin Yong，Lin Yu-cheng.Abnormal relation and its geological controls of coalbed methane content to buried depth of coal seams ［J］.Journal of China Coal Society，2010，35(7):1165-1169.)

基于双CCD相机的三轴试验三维成像测量技术

3D Image Measurement of Triaxial Testing Using Two CCD Cameras

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics

本文评价

[1]	孙浩，陈帅军，金爱兵，朱东风. 含裂隙类岩石试样单轴抗压强度特征及裂纹演化规律[J]. 东北大学学报（自然科学版）, 2022, 43(3): 404-413.
[2]	赵文，李天亮，韩健勇，程诚. 砾砂与混凝土管界面剪切力学特性试验[J]. 东北大学学报:自然科学版, 2020, 41(3): 424-430.
[3]	侯振隆，王恩德，唐水亮，袁园. 方向总水平导数法的改进和边界识别中的应用[J]. 东北大学学报:自然科学版, 2019, 40(1): 104-108.
[4]	杜荔，高利平，温馨. 基于CS-SCHT域的相幅结合水印算法[J]. 东北大学学报:自然科学版, 2018, 39(4): 492-496.
[5]	杜艳强，杨春和，巫尚蔚. 循环荷载下尾矿粉土的孔隙水压力特性[J]. 东北大学学报:自然科学版, 2016, 37(4): 583-588.
[6]	高鹏;韩跃新;李艳军;孙永升;. 基于数字图像处理的铁矿石深度还原评价方法[J]. 东北大学学报(自然科学版), 2012, 33(1): 133-136.
[7]	徐久强;刘辉;郎丰高;王晶;. 基于黑莓手机的QR码识别系统[J]. 东北大学学报(自然科学版), 2010, 31(10): 1373-1376+1380.