东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (3): 380-385.DOI: 10.12068/j.issn.1005-3026.2019.03.015

• 机械工程 • 上一篇    下一篇

齿顶修形行星轮系啮合刚度分析

马辉， 段田堂， 孙衍宁， 陈康康   

  1. (东北大学 机械工程与自动化学院， 辽宁 沈阳110819)
  • 收稿日期:2018-01-22 修回日期:2018-01-22 出版日期:2019-03-15 发布日期:2019-03-08
  • 通讯作者: 马辉
  • 作者简介:马辉(1978-)，男，河北安平人，东北大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(11772089)； 中央高校基本科研业务费专项资金资助项目 (N170308028).

Mesh Stiffness Analysis of Planetary Gear System with Gear Tip Relief

MA Hui， DUAN Tian-tang， SUN Yan-ning， CHEN Kang-kang   

  1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China.
  • Received:2018-01-22 Revised:2018-01-22 Online:2019-03-15 Published:2019-03-08
  • Contact: MA Hui
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

833

摘要： 以含有太阳轮减重孔、齿圈固定孔、柔性系杆的行星轮系为研究对象，基于ANSYS软件，建立了考虑实际结构的修形行星轮系有限元模型.基于该模型，研究了齿顶修形以及减重孔、齿圈轮缘厚度、柔性系杆等齿轮结构对行星轮系时变啮合刚度的影响.研究结果表明:齿顶修形改变了啮合刚度曲线的形状和数值大小;减重孔增大将导致啮合刚度减小而齿圈支持率变大使啮合刚度增加;同时，系杆越柔，行星轮系啮合刚度波动越小.研究结果可为实际生产中考虑修形的行星轮系设计提供理论依据.

关键词: 行星轮系, 啮合刚度, 齿顶修形, 齿轮结构

Abstract: Taking the planetary gear system as the research object， which contains lightening hole of sun gear， pin support of ring gear and the flexible carrier arm， a finite element model of planetary gear system with gear tip relief was established on the basis of ANSYS software. Based on the model， the influence of the gear tip relief and gear structure， such as lightening hole of sun gear， the rim thickness of ring gear and the flexible carrier arm， on the mesh stiffness was analyzed. The results show that the gear tip relief changes the shape and value of the mesh stiffness curve. Mesh stiffness decreases with the increase of lightening hole size. However， with the increase of the backup ratio of ring gear， the mesh stiffness increases gradually. Meanwhile， the more flexible the carrier arm is， the smaller the gear meshing stiffness fluctuates. The research results may provide a theoretical basis for the design of planetary gear system considering gear modification in actual production.

Key words: planetary gear system, mesh stiffness, gear tip relief, gear structure

中图分类号: