基于概率密度演化方法的装配式箱涵构件可靠度研究

doi:10.12068/j.issn.1005-3026.2021.12.016

东北大学学报（自然科学版） ›› 2021, Vol. 42 ›› Issue (12): 1782-1789.DOI: 10.12068/j.issn.1005-3026.2021.12.016

基于概率密度演化方法的装配式箱涵构件可靠度研究

康玉梅，李佳其，刘子傲，于佳月

(东北大学资源与土木工程学院，辽宁沈阳110819)

修回日期:2021-03-29 接受日期:2021-03-29 发布日期:2021-12-17
通讯作者: 康玉梅
作者简介:康玉梅(1973-)，女，辽宁灯塔人，东北大学副教授.
基金资助:
国家自然科学基金资助项目(U1602232) .

Reliability Study of Prefabricated Box Culvert Components Based on Probability Density Evolution Method

KANG Yu-mei， LI Jia-qi， LIU Zi-ao， YU Jia-yue

School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China.

Revised:2021-03-29 Accepted:2021-03-29 Published:2021-12-17
Contact: KANG Yu-mei
About author:-
Supported by:
-

摘要/Abstract

摘要： 为提高装配式箱涵构件可靠度分析的计算精度和效率，依托实际工程，基于概率密度演化方法对其进行了研究.首先，建立了装配式箱涵构件的功能函数，推导出功能函数的广义概率密度演化方程，并采用有限差分法进行求解;其次，对求解得到的概率密度函数进行积分，得到构件的失效概率，进而获得相应的可靠指标;最后，与蒙特卡罗法进行对比，分析概率密度演化方法的适用性.研究表明:概率密度演化方法在装配式箱涵构件可靠度的求解过程中，从物理系统与随机系统联系的角度出发，更加充分地考虑了构件参数的随机性和样本点之间的概率联系.该方法与蒙特卡罗法相比可以有效避免随机收敛性，在保证结果唯一的前提下，提高了计算精度和效率.

关键词: 概率密度演化方法;装配式箱涵;构件可靠度;蒙特卡罗法;功能函数

Abstract: The calculation accuracy and efficiency of reliability analysis of prefabricated box culvert components are studied using the probability density evolution method based on the actual project. Firstly， the function of prefabricated box culvert is established， the generalized probability density evolution equation of the function is derived， and the finite difference method is used to solve the problem. Secondly， the probability density function is integrated to get the failure probability of components， and then the corresponding reliability index is obtained. Finally， it is compared with Monte Carlo method to analyze the applicability of probability density evolution method. The results show that: in the process of solving the reliability of prefabricated box culvert components， the probability density evolution method fully considers the randomness of component parameters and the probability relationship between sample points based on the relationship between physical system and stochastic system. Compared with Monte Carlo method， probability density evolution method can avoid random convergence effectively， and improve the accuracy and efficiency of calculation under the premise of guaranteeing the unique result.

Key words: probability density evolution method; prefabricated box culvert; reliability of components; Monte Carlo method; function

中图分类号:

TU312.1

康玉梅，李佳其，刘子傲，于佳月. 基于概率密度演化方法的装配式箱涵构件可靠度研究[J]. 东北大学学报（自然科学版）, 2021, 42(12): 1782-1789.

KANG Yu-mei， LI Jia-qi， LIU Zi-ao， YU Jia-yue. Reliability Study of Prefabricated Box Culvert Components Based on Probability Density Evolution Method[J]. Journal of Northeastern University(Natural Science), 2021, 42(12): 1782-1789.

参考文献

[1]Das S.Application of diagnostic load testing and 3D-FEA in load rating of RC box culverts［J］.Bridge Structures—Assessment，Design and Construction，2013，9(4):155-167.
[2]Peng Q，Jin D I，Feng J Q.Shear stress in the webs of single-box multi-cell composite box girders with corrugated steel webs ［J］.Engineering Mechanics，2017，34(7):97-107.
[3]康玉梅，刘子傲，吴鹏飞.考虑荷载作用顺序的结构可靠度分析方法［J］.东北大学学报(自然科学版)，2019，40(11):1648-1653.(Kang Yu-mei，Liu Zi-ao，Wu Peng-fei.Structural reliability analysis method considering load sequence ［J］.Journal of Northeastern University(Natural Science)， 2019，40(11):1648-1653.)
[4]Nie J S，Ellingwood B R.Directional methods for structural reliability analysis ［J］.Structural Safety，2000，22:233-249.
[5]Kleiber M，Hien T D.The stochastic finite element method:basic perturbation technique and computer implementation ［M］.New York:John Wiley & Sons，1992:198-235.
[6]Ghanem R，Spanos P D.Polynomial chaos in stochastic finite elements ［J］.Journal of Applied Mechanics，1990，57(1):197-202.
[7]Bhargava K，Mori Y，Ghosh A K.Time-dependent reliability of corrosion-affected RC beams.Part 1:Estimation of time-dependent strengths and associated variability［J］.Nuclear Engineering and Design，2011，241(5):1371-1384.
[8]唐小松，李典庆，曹子君，等.有限数据条件下边坡可靠度分析的Bootstrap方法［J］.岩土力学，2016，37(3):893-911.(Tang Xiao-song，Li Dian-qing，Cao Zi-jun，et al.Bootstrap method for slope reliability analysis with limited data ［J］.Geotechnical Mechanics，2016，37(3):893-911.)
[9]Chen X，Lind N C.Fast probability integration by three-parameter normal tail approximation［J］.Structural Safety，1982，1(4):269-276.
[10]Guo J，Zhao J，Zeng S.Structural reliability analysis based on analytical maximum entropy method using polynomial chaos expansion［J］.Structural and Multidisciplinary Optimization， 2018，58(3):1187-1203.
[11]Li J，Chen J B.Stochastic dynamics of structures［M］.Singapore:John Wiley & Sons，2009:568-593.
[12]Li J，Chen J B.The principle of preservation of probability and the generalized density evolution equation ［J］.Structural Safety，2008，30(1):65-77.
[13]Chen J B，Chen J P.Error estimate of point selection in uncertainty quantification of nonlinear structures involving multiple nonuniformly distributed parameters［J］.International Journal for Numerical Methods in Engineering，2019，118(9):536-560.
[14]Li J，Yan Q，Chen J B.Stochastic modeling of engineering dynamic excitations for stochastic dynamics of structures［J］.Probabilistic Engineering Mechanics，2012，27(1):19-28.
[15]中交公路规划设计院.公路钢筋混凝土及预应力混凝土桥涵设计规范:JTG3362—2018［M］.北京:人民交通出版社，2018:483-579.(Highway Planning and Design Institute.Code for design of highway reinforced concrete and prestressed concrete bridges and culverts:JTG3362—2018［M］.Beijing:China Communications Publishing，2018:483-579.)
[16]Li J，Chen J B.The number theoretical method in response analysis of nonlinear stochastic structures［J］.Computer Mechanics， 2007，39(6):693-708.
[17]Meng Z，Zhou H L，Hu H，et al.Enhanced sequential approximate programming using second order reliability method for accurate and efficient structural reliability-based design optimization［J］.Applied Mathematical Modelling，2018，62(6):562-579.
[18]王茜.开裂在役钢筋混凝土梁加卸载刚度与正常使用可靠度分析［D］.成都:西南交通大学，2017.(Wang Xi.Analysis of loading and unloading stiffness and normal service reliability of cracked reinforced concrete beams in service［D］.Chengdu:Southwest Jiaotong University，2017.)

基于概率密度演化方法的装配式箱涵构件可靠度研究

Reliability Study of Prefabricated Box Culvert Components Based on Probability Density Evolution Method

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价