东北大学学报(自然科学版) ›› 2022, Vol. 43 ›› Issue (6): 844-849.DOI: 10.12068/j.issn.1005-3026.2022.06.012

• 材料与冶金 • 上一篇    下一篇

残极集气系统对无组织烟气减排的作用

李雪娇1,2, 杨洪英1, 胡红胜2, 宋海琛2   

  1. (1. 东北大学 冶金学院, 辽宁 沈阳110819; 2. 沈阳铝镁设计研究院有限公司, 辽宁 沈阳110001)
  • 修回日期:2021-06-21 接受日期:2021-06-21 发布日期:2022-07-01
  • 通讯作者: 杨洪英
  • 作者简介:李雪娇(1989-),女,辽宁沈阳人,东北大学博士后研究人员; 杨洪英(1960-),女,辽宁沈阳人,东北大学教授,博士生导师.
  • 基金资助:
    国家重点研发计划项目(2018YFC19022002).

Effect of Residual Gas Collection System on the Emission of Fugitive Emission Gas

LI Xue-jiao1,2, YANG Hong-ying1, HU Hong-sheng2, SONG Hai-chen2   

  1. 1. School of Metallurgy, Northeastern University, Shenyang 110819, China; 2. Shenyang Aluminum Magnesium Design & Research Institute Co., Ltd., Shenyang 110001, China.
  • Revised:2021-06-21 Accepted:2021-06-21 Published:2022-07-01
  • Contact: YANG Hong-ying
  • About author:-
  • Supported by:
    -

摘要: 残极冷却过程中的无组织排放是铝电解HF进入大气的主要方式.针对该问题,开发了残极集气系统,研究了不同烟气流速下,残极集气系统内残极的温度变化、HF散发规律,以及该系统对HF无组织排放的减排效果.结果表明,残极集气系统可有效降低残极冷却过程中的无组织排放.残极进入集气系统的初始温度为920℃,降温速度先快后慢.HF质量浓度随烟气流量加大而增加,随烟气温度降低而减少,通过拟合函数进行了相关性分析.运行4h时,HF的累计散发量达到总散发量的95%以上.在最优烟气流速4000m3/h时,氟化物的无组织排放较无减排措施时降低0.201kg/t(吨铝减排量).

关键词: 残极冷却;无组织排放;HF;残极集气系统;铝电解

Abstract: Fugitive emission during residual anode cooling is the main way for aluminum electrolytic HF entering the atmosphere. In response to this problem, a residual gas collection system was developed. Besides, the residual temperature, HF emission and the fugitive emission reduction effect of the system were studied under different gas flow rates. The results show that the residual gas collection system can reduce HF fugitive emission effectively. The initial temperature of the residual anode is 920℃. The temperature drops quickly and then slowly. The HF concentration increases with the increase of the flue gas flow, and decreases with the decrease of the flue gas temperature. Correlation analysis is carried out through the fitting function. After 4h, the cumulative HF emission reaches more than 95% of the total emission. HF fugitive emission is reduced by 0.201kg/t at the optimal gas flow rate(4000m3/h), compared with no HF emission reduction measures.

Key words: residual anode cooling; fugitive emission; HF; residual gas collection system; aluminum electrolysis

中图分类号: